14770 North 78th Way

Suite B

Scottsdale, AZ 85260

P (480) 423-9045

F (480) 423-9046


ID#3290 - MAG
BORING MILL VERT. LIVE SPINDLE CNC



MAG VTC 1000 VERTICAL TURNING LATHE/ LIVE TOOLING
NEW 2009

SPECIFICATIONS:
MAXIMUM SWING     51.18"
MAXIMUM FACING CAPACITY    51.18"
FIXED RAIL HEIGHT    66.14"
FIXED MAX. HEIGHT -
   TOP OF SPINDLE NOSE TO BOTTOM OF RAM  66.14"
TWO SPEED TABLE DRIVE TRANSMISSION  4.00:1 GEAR RATIO
AC DUAL DRIVE MOTORS    SIEMSNS
DRIVING POWER (S6-40 RATING)   112 HP
DRIVING POWER (CONTINUOUS RATING)  75 HP
TABLE/CHUCK SPEED - INFIINTELY VARIABLE  1 - 630 RPM
LOW RANGE     1 - 157 RPM
HIGH RANGE     1 - 630 RPM
CONSTANT TORQUE     17,113 NM
LOW RANGE     1 - 31 RPM
HIGH RANGE     1 - 125 RPM
TABLE LOAD CAPACITY    16,500 LBS
VERTICAL RAM TRAVEL - Z AXIS   49.41"
HORIZONTAL RAM TRAVEL X AXIS   
     RIGHT OF CENTER (+X AXIS)   33.07"
     LEFT OF CENTER (-X AXIS)   14.57"
TOOL SHANK TAPER    2:1 TAPER
WEDGELOCK CLAMPING    19,000 LBS
GAUGE DIAMETER     6.3"

TABLE/CHUCK SIZE:
PLAIN TABLE     39.37"
WITH PARALLEL T-SLOTS AND (12) RADIAL T-SLOTS:
TABLE PREPARED TO ACCEPT FOUR (4) BORING MILL JAWS:
PILOT BORE DIAMETER    7.87"
MAXIMUM SPEED     630 RPM
FIXED RAIL HEIGHT REDUCED BY TABLE THICKNESS 5.67"

LIVE SPINDLE:
AC DRIVE MOTOR (S6-40%)    44 HP
AC DRIVE MOTOR (CONTINUOUS)   29 HP
SPINDLE SPEED     4,000 RPM
LIVE SPINDLE TOOLING TAPER   KENNAMETAL KM80

C-AXIS:
NUMBER OF POSITION    360,000
RAPID TRAVERSE RATE    20 RPM
TORQUE AVAILABLE    7,800 NM
POSITIONING ACCURACY    10 ARC SEC
POSITIONING REPEATABILITY   5 ARC SEC

AUTOMATIC TOOL CHANGER (W/LIVE SPINDLE)  18 POCKETS
WEDGELOCK TAPER POCKETS    2
LIVE SPINDLE ATTACHMENT POCKET   1
KM80 MODULAR TOOL POCKETS   15
WEDGELOCK TO KM80 CLAMPING UNIT
              FOR MODULAR TOOLS   1
WEDGELOCK TOOL POCKET CAPACITIES:
      * MAXIMUM TOOL WIDTH   13.39"
      * LEFT AND RIGHT OF CENTER  6.69"
MAXIMUM TOOL THICKNESS/DIAMETER
       (ADJ. POCKET FULL)   5.91"
MAXIMUM TOL WEIGHT    253 LBS
MAXIMUM DISK WEIGHT CAPACITY   3300 LBS
KM MODULAR TOOL POCKET CAPACITIES:
      * MAXIMUM TOOL DIAMETER: 4.72"
      * MAXIMUM TOOL LENGTH: 19.68"
      * MAXIMUM TOOL WEIGHT: 40 LBS

COOLANT SYSTEM:
COOLANT TANK CAPACITY    127 GALLONS
FILTRATION SYSTEM (BAG FILTER)   50 MICRON
COOLANT THROUGH THE NOZZLES AND LIVE SPINDLE 8 GPM
DIMENSIONS     175.23" x 165.35" x 196.85
WEIGHT      55,000 LBS
RAM SIZE     9.84" X 9.84"
RAPID TRAVERSE RATE (X & Z AXES)  787 IPM
FEEDRATES PER MINUTE INFINITELY VARIABLE
                   (X & Z AXES)   .004 - 787 IPM
FEED THRUST AVAILABLE (X & Z AXES DOWN)  7600 LBS
FEED THRUST AVAILABLE (Z AXIS UP)  5000 LBS

EQUIPPED WITH:
GE FANUC 310i CONTROL
15" COLOR LCD
REMOTE PENDANT WITH MPG
     * AXIS SELECTION
     * INCREMENTAL AMOUNT
     * MANUAL PULSE GENERATOR
     * 78.74" OF CABLE
5120 METERS OF PART PROGRAM STORAGE
1000 STORED PART PROGRAMS
BACKGROUND EDITING
G CODE SYSTEM 'C'
HELICAL INTERPOLATION
CYLINDRICAL INTER POLATION
POLAR COORDINATE INTERPOLATION
THREAD CUTTING & FEED PER REVOLUTION
64 TOOL OFFSETS
TOOL NOSE RADIUS COMPENSATION
SPINDLE ORIENTATION (PROGRAMMABLE)
TABLE ORIENTATION (PROGRAMMABLE)
LIVE SPINDLE ORIENTATION (PROGRAMMABLE)
WORK COORDINATE SYSTEM
CANNED CYCLES FOR DRILLING
RIGID TAPPING
TOOL RETRACT AND RETURN WITH RET. FOR RIGID TAPPING
CUSTOM MACROS & VARIABLES (600 TOTAL COMMON)
PROGRAMMABLE INCH / METRIC
PROGRAMMABLE DATA INPUT
STORED PITCH ERROR
INTERPOLATION PITCH ERROR
DISTANCE CODED LINEAR SCALE
DUAL POSITION FEEDBACK
CONTROL AXIS DETACH
CONSTANT SURFACE SPEED
TWO SPEED GEARBOX
COOLANT THROUGH THE SPINDLE
RENISHAW HPMA TOOL PROBE (HIGH PRECISION MOTORIZED ARM)
ONE (1) RP3 PROBE HEAD
ONE (1) TS13 MACHINE INTERFACE UNIT
TWO (2) 50 MM CUBE STYLI
PART PROBE (RADIO TRANSMISSION) CONSISTING OF:
   * ONE (1) PROBE ARBOR (KM80)
   * ONE (1) RMP60M MODULE
   * ONE (1) L100 EXTENTION
   * ONE (1) PROBE (HEAD) MODULE
   * TWO (2) 100 MM STYLI
   * ONE (1) RM1 INTERFACE RECEIVER
CHIP CONVEYOR SYSTEM
FULL ENCLOSURE TO CONTAIN THE COOLANT AND SWARF INSIDE THE MACHINE
ENERGY EFFICIENT WORK LIGHT
REMOTE HANDLE OPERATOR STATION
DIAMETER PROGRAMMING FORMAT
MECHANICAL SERVICE MANUAL
ELECTRICAL SERVICE MANUAL
OPERATOR MANUALS
MECHANICAL AND ELECTRICAL PRINTS
LINEAR SCALES ON X AND Z AXES

NOTE:
THE ENCLOSURE ROOF WILL OPEN FOR CRANE ACCESS
NO SPECIAL FOUNDATION IS REQUIRED FOR THIS MACHINE. FOR MAXIMUM MACHINE
UTILIZATION A 31.5" THICK SLAB CONSTRUCTED OF REINFORCED CONCRETE IS REQUIRED.
CONSULT FACTORY FOR SOIL BEARING CAPACITY REQUIREMENTS.
860 'ON TIME' HOURS - CURRENTLY RUNNING ONE SHIFT
INSTALLED IN DECEMBER OF 2009





Not exactly sure what you are looking for?
Contact us ... WE CAN FIND IT.


This machine is subject to prior sale and/or may be removed by Quick Machinery Sales at their discretion without notice. This is not an offer of sale. For formal quote from QMS please see above.
Quick Machinery Sales | 14770 North 78th Way Suite B | Scottsdale AZ 85260
P (480) 423-9045 | F (480) 423-9046 | sales@quickmachinerysales.com
Home | Specials | Inventory | Quote | We Can Find It | Services | Contact Us