MAZAK INTEGREX 400 IVST
CNC LATHES MULTI AXIS
.jpg)
.jpg)
.jpg)
THIS INTEGREX 400ST HAS GL-400 GANTRY, MATRIX CONTROL, 1000 PSI COOLANT THRU, 15" KITAGAWA CHUCK AND PROBE.
| Maximum Swing | 30" |
| Max Turning Diameter | 30" |
| Main Spindle Bore/Max Bar Capacity | 4.4/ 4.0 |
| Tail Stock/Sub Spindle | Sub Spindle |
| X-Axis Travel (X1, X2, X3) | 24.8, 9 |
| Z-Axis Travel (Z1, Z2, Z3) | 62, 62 |
| Y-Axis Travel (Y1, Y2, Y3) | 9 |
| W-Axis Travel Sub Spindle | 62 in |
| Main Spindle Chuck Size | 15" |
| Main Spindle Chuck Type | Hydraulic |
| Main Spindle Bore Diameter | 4.4" |
| Main Spindle Maximum Bar Work | 4" |
| Main Spindle Speed | 3,300 RPM |
| Main Spindle Horsepower (CONT. /30 MINS) | 40 |
| Sub Spindle/2nd Spindle Chuck Size | 12 |
| Sub Spindle/2nd Spindle Bore Size | 4.4 |
| Sub Spindle/2nd Spindle Chuck Type | Hydraulic |
| Sub Spindle/2nd Spindle Speed | 4,000 RPM |
| Sub Spindle/2nd Spindle Horsepower (CONT. /30 MINS) | 40 |
| ATC Magazine Capacity | 120 |
| Turret Tool Positions 1, 2 | 9 |
| B Axis Rotary Tool Spindle Speed | 12000 rpm |
| B-Axis Rotary Tool Spindle Horsepower | 24.6 hp |
| Chip Conveyor | Yes |
| High Pressure Coolant System (PSI) | 1000 |
| Gantry System | Yes |
| Control | CNC (MAZATROL MATRIX) |
SPECIFICATIONS:
X AXIS TRAVELS 24.8"
Z - AXIS 62"
Y - AXIS 9"
X2 AXIS TRAVELS 9"
Z2 - AXIS 62"
W - AXIS 62"
MAXIMUM MACHINING DIAMETER (UPPER TURRET) 29.9"
MAXIMUM MACHINING DIAMETER (LOWER TURRET) 16.5"
SPINDLE SPEED 3,300 RPM
ROTARY TOOL SPEED 12,000 RPM
ATC TOOL MAGAZINE 120 CAPTO
MAZATROL MATRIX CONTROL
213 PSI THRU/FLOOD COOLANT UPPER TURRET
71 PSI LOWER TURRET
SUPER FLOW II 1,000 PSI HIGH PRESSURE COOLANT
CHUCK AIR BLAST MAIN SPINDLE
UPPER TURRET AIR BLAST
SHOWER COOLANT (2.7 KG, 60L) 2ND SPINDLE
COOLANT AND AIR FOR CHUCK (1ST SPINDLE)
15 THRU HOLE CHUCK (B15A08) MAIN SPINDLE
OVERLOAD DETECTION SYSTEM
G1400F GANTRY, RIGHT SIDE, SHUTTLE LOOP, TYPE 3 W/D3 HAND AND EXM
WORK MEASURING SYSTEM (OMP 40)
AUTO PECKING W/LOAD DETECTION UPPER TURRET
OPTIMIZER TECH. LIBRARY FOR INT 400 MARK III AND GF-L SERIES GANY
SMW UC2 315/91 QUICK JAW CHANGE CHUCK
DUAL HINGE-BELT CONVEYOR
WORK EXIT CONVEYOR
ALL AVAILABLE MANUALS
