MAZAK INTEGREX e420II-HST
CNC LATHES MULTI AXIS
.JPG)
.JPG)
.JPG)
.JPG)
THIS INTEGREX e-420H-ST HAS 80" CENTERS, SUB-SPINDLE, 120 TOOL ATC, 213 PSI COOLANT THRU, E-TOWER AND E-TOWER MONITOR.
| Maximum Swing | 26.38" |
| Max Turning Diameter | 26.38" |
| Main Spindle Bore/Max Bar Capacity | 3.56"/3" |
| Tail Stock/Sub Spindle | Sub Spindle |
| Maximum Swing Over Cross Slide | 26.38" |
| X-Axis Travel (X1, X2, X3) | 33.27/ 14.25 |
| Z-Axis Travel (Z1, Z2, Z3) | 82.2/ 74.53 |
| Y-Axis Travel (Y1, Y2, Y3) | 16.54 |
| C-Axis Indexing (1, 2) | .0001°/ .0001° |
| W-Axis Travel Sub Spindle | 77.28 in |
| Main Spindle Chuck Size | 10" |
| Main Spindle Chuck Type | Hydraulic |
| Main Spindle Bore Diameter | 4.08" |
| Main Spindle Maximum Bar Work | 3.58" |
| Main Spindle Speed | 6,000 RPM |
| Main Spindle Horsepower (CONT. /30 MINS) | 40 |
| Sub Spindle/2nd Spindle Chuck Size | 10 |
| Sub Spindle/2nd Spindle Bore Size | 4.08 |
| Sub Spindle/2nd Spindle Speed | 6,000 RPM |
| Sub Spindle/2nd Spindle Horsepower (CONT. /30 MINS) | 40 |
| Main & Sub Spindle Synchronization | Yes |
| ATC Magazine Capacity | 120 |
| B Axis Rotary Tool Spindle Speed | 12000 rpm |
| B-Axis Rotary Tool Spindle Horsepower | 30 hp |
| Chip Conveyor | Yes |
| Milling Spindle Synchronous Tapping | Yes |
| Tool Eye Automatic Front Spindle | Yes |
| Tool Eye Automatic Second Spindle | Yes |
| Tool Eye Measurement Upper Turret | Yes |
| Tool Eye Measurement Lower Turret | Yes |
| Coolant Thru Milling Head | Yes |
| High Pressure Coolant System (PSI) | 213 |
| Control | CNC (MAZATROL MATRIX) |
SPECIFICATIONS:
MAX SWING 26.38"
MAX MACHINING DIAMETER 26.38"
SPINDLE BORE/ BAR CAPACITY 3.56"/3"
MAX MACHINING LENGTH 79.8"
MAIN SPINDLE SPEED 6000 RPM (CHUCKS 4000 RPM)
SECOND SPINDLE SPEED 6000 RPM (CHUCKS 4000 RPM)
MILLING SPINDLE 240 DEGREES
ATC MAGAZINE CAPACITY 120 (CAPTO C6)
MAX SPEED 12000RPM
MOTOR OUTPUT (15 MIN RATING) 30HP/22kw
X AXIS TRAVEL 33.27"
X2 AXIS TRAVEL 14.25"
Y AXIS TRAVEL 16.54"
Z AXIS TRAVEL 82.2"
Z2 AXIS TRAVEL 74.53"
W AXIS TRAVEL 77.28"
MAZATROL MATRIX CONTROL
10" CHUCK (B210) - 1ST SPINDLE
10" CHUCK CLOSED CYLINDER - 2ND SPINDLE
213 PSI COOLANT THRU
WORK MEASURING SYSTEM RMP 600 (PROBE)
1ST SPINDLE C-AXIS 0.0001
2ND SPINDLE C-AXIS 0.0001 CONTOURING
LOWER TURRET MILLING FUNCTION (6000 RPM)
CHUCK AIR BLAST (1ST & 2ND SPINDLE)
CONSEP CHIP CONVEYOR
ALL AVAILABLE TOOLING AND MANUALS
CONTROL OPTIONS
EIA
SPIRAL
EIA 3D COMP
ROTATION
GEOMETRIC
SCALING
EXT DATA I/O
HOB MACHINING
SHAPE COMP
THREAD
TILTED WORKING PLANE
SP/ROT. PARA. ADJUST
5 AXIS TOOL COMP
AUTO PECKING
TOOL CENTER POINT CONTROL
RE-THREAD LOWER TURRET MAZATROL
MILL TURNING MAZATROL
5-AXIS TOOL LENGTH COMP
SUB C-AXIS CONTROL
INVERSE TIME
3-D CO-OR ROT.
ATLM
POLAR COORDINATES INPUT
COMPARISON STOP
EIA CONVERSION
G54.1
SYNCH MILL TAPPING
FLASH TOOL
INCH/MM CONVERSION
ROT-AXIS SHAPE COMP
G00 SLOPE CONST
VARIABLE 600 SETS
CYLINDER
SIMUTANEOUS 5 AXIS
EIA HERICAL TAP CYCLE
EIA PATTERN CYCLE
THREAD CUT-SPEED OVERRIDE
COOLANT THRU MILLING HEAD
