MORI SEIKI NT 4300 DCG-1500SZ 5 AXIS LATHE
CNC LATHES MULTI AXIS
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
THIS 2014 MORI SEIKI NT 4300 DCG-1500SZ 5 AXIS LATHE WITH FANUC MAPPS CONTROL, (2) 12" CHUCKS, 1000 PSI COOLANT THRU AND A 100 POSITION ATC.
| Maximum Swing | 28.7" |
| Max Turning Diameter | 25.9" |
| Main Spindle Bore/Max Bar Capacity | 4.1/ 3.5 |
| Tail Stock/Sub Spindle | Sub Spindle |
| X-Axis Travel (X1, X2, X3) | 29.5, 7.68 |
| Z-Axis Travel (Z1, Z2, Z3) | 61.02" (+3.94"), 60.04 |
| Y-Axis Travel (Y1, Y2, Y3) | +/- 8.3" |
| Main Spindle Bore Diameter | 4.1" |
| Main Spindle Maximum Bar Work | 3.5" |
| Main Spindle Speed | 3,000 RPM |
| Main Spindle Horsepower (CONT. /30 MINS) | 30 |
| ATC Magazine Capacity | 100 |
| Number of Turrets | 1 |
| Turret Tool Positions 1, 2 | 12 |
| Turret Rotary Tool Spindle Speed 1, 2 | 12000 |
| B-Axis Travel | +/- 120 DEGREES |
| Chip Conveyor | Side |
| Coolant Thru Milling Head | No |
| High Pressure Coolant System (PSI) | 1000 |
| (HQR) Standard Chuck Dia. Main Spindle (L) | 12" |
| Control | CNC (FANUC/ MAPPS 31iA5) |
SPECIFICATIONS:
SWING OVER BED 28.7 IN
MAX. TURNING DIAMETER 25.9 IN
MAX. TURNING LENGTH 58.9 IN
X1 AXIS TRAVEL 29.5 IN.
Z1 AXIS TRAVEL 61.02 IN.+ 3.94 IN
Y-AXIS TRAVEL +/- 8.3 IN.
B-AXIS TOTAL INDEXING RANGE +/- 120 DEGREES
X2 AXIS TRAVEL 7.68 IN
Z2 AXIS TRAVEL 60.04 IN
SPINDLE SPEED 3000 RPM
SPINDLE NOSE A2-8 IN.
SPINDLE BORE 4.1 IN.
2ND SPINDLE SPEED 3000 RPM
TOOL POSITIONS 100 ATC
TOOLING TYPE CAPTO C6
2ND TURRET TOOL POSITIONS 12
ROTARY TOOL SPEED 12,000 RPM
RAPID TRAVERSE RATE
X1 & Z1-AXIS 1968.5 IPM
X2 & Z2-AXIS 1181.1 IPM
Y-AXIS 1181.1 IN
SPINDLE MOTOR 30 HP
FANUC/MAPPS 31
12" CHUCK
2ND TURRET MILLING
C/C RIGHT SIDE DISCHARGE
HIGH PRESSURE COOLANT 1000+ (7 MPA)
MAGNA SCALES ON B AND X AXIS
CHUCK FOOT SWITCH SINGLE
MANUAL PULSE GENERATOR
256 KB 640 METERS 500 PROGRAM STORAGE
12 STATION TURRET
3,000 RPM SPINDLE 1&2
12,000 RPM MILLING
