MORI SEIKI MODEL SL-403CMC/2000
CNC LATHES MULTI AXIS.JPG)
.JPG)
.JPG)
.JPG)
.JPG)
.JPG)
.JPG)
.JPG)
.JPG)
.JPG)
HARDLY USED 2015 MORI SEIKI MODEL SL-403CMC/2000 SWINGS 37", HAS 91" BETWEEN CENTERS, 1500 RPM SPINDLE, 18" KITAGAWA BB218 BIG BORE (6.55") CHUCK ALONG WITH A FANUC 32iB CONTROL AND LNS STEADY REST.
| Maximum Swing | 36.8" |
| Max Turning Diameter | 25.5" |
| Main Spindle Bore/Max Bar Capacity | 7.3/ 6.55 |
| Tail Stock/Sub Spindle | Tail Stock |
| Maximum Swing Over Cross Slide | 29.1" |
| Distance Between Centers | 91.5" |
| Maximum Cutting Length | 77.6" |
| Distance Between Spindles | 91.5" |
| X-Axis Travel (X1, X2, X3) | 13.6 |
| Z-Axis Travel (Z1, Z2, Z3) | 82.7 |
| C-Axis Indexing (1, 2) | .001 |
| Main Spindle Chuck Size | 18" |
| Main Spindle Chuck Type | Air |
| Main Spindle Bore Diameter | 7.3" |
| Main Spindle Maximum Bar Work | 6.55" |
| Main Spindle Speed | 1,500 RPM |
| Main Spindle Horsepower (CONT. /30 MINS) | 40/ 30 |
| Turret Tool Positions 1, 2 | 12 |
| Turret Rotary Tool Spindle Speed 1, 2 | 3000 |
| Turret Rotary Tool Horse Power 1, 2 | 12 |
| Steady Rest | Yes |
| Chip Conveyor | Yes |
| Chip Conveyor | Side |
| High Pressure Coolant System (PSI) | 1000 |
| (HQR) Standard Chuck Dia. Main Spindle (L) | 18" |
| Control | CNC (FANUC F32iB) |
| Dimensions | 57.7” X 124.6” X 100.1” |
| Weight | 33,000 LBS |
SPECIFICATIONS
SWING OVER BED 36.8”
SWING OVER CROSS SLIDE 29.1”
DISTANCE BETWEEN CENTERS 91.5”
MAXIMUM TURNING DIAMETER 25.5”
STANDARD TURNING DIAMETER 14.7”
MAXIMUM TURNING LENGTH 77.6”
X-AXIS TRAVELS 13.6”
Z-AXIS TRAVELS 82.7”
MAXIMUM SPINDLE SPEED 1,500 RPM
NUMBER OF SPEED RANGES 2
SPINDLE NOSE JIS A2-15
THROUGH SPINDLE HOLE DIAMETER 7.3”
MAXIMUM SPINDLE INDEXING ANGLE 0.001°
NUMBER OF TOOL STATIONS: 12
SHANK HEIGHT FOR SQUARE TOOL: 1-1/4”
SHANK DIAMETER FOR BORING BAR: 2-1/2”
TURRET INDEXING TIME .04 SECONDS
MAX ROTARY TOOL SPINDLE SPEEDS 3,000 RPM
RAPID TRAVERSE RATE (X-AXIS) 787.4 IPM
RAPID TRAVERSE RATE (Y-AXIS) 944.9 IPM
RAPID TRAVERSE RATE (C-AXIS) 56 MIN-¹
JOG FEED RATE 0 – 197 IPM
TAILSTOCK TRAVEL 78.7”
SPINDLE DIAMETER 5.9”
TAILSTOCK TAPER MT5
TAILSTOCK SPINDLE TRAVEL 5.9”
SPINDLE DRIVE (30 MIN/CONT) 40/30 HP
FEED MOTOR 8/9.3 HP
ROTARY TOOL SPINDLE MOTOR
(30 MIN/CONT) 12/10 HP
COOLANT PUMP MOTOR: .69 HP
FLOOR SPACE 257.7” X 124.6” X 100.1”
WEIGHT (APPROXIMATELY) 33,000 LBS
ELECTRICS 220 VOLT, 3 PH, 60 CYC
COOLANT TANK CAPACITY 87.1 GALLONS
EQUIPPED WITH
FANUC F32iB (MAPPS IV) CONTROL
HIGH-OUTPUT SPINDLE
CHIP BLASTER JV-40 HIGH PRESSURE COOLANT SYSTEM
LNS TURBO RIGHT DISCHARGE, HINGE TYPE CHIP CONVEYOR
18 KITAGAWA BB218 LARGE THRU-HOLE (6.55) POWER CHUCK
VARIABLE SPEED THREAD CUTTING
THREAD RE-CUTTING
LNS AUTOBLOCK K4 1-ZSW AUTOMATIC STEADY REST
(4) ROTARY TOOL HOLDERS
(1) FACE CUTTING POSITIONING BLOCKS
(3) OD CUTTING POSITIONING TOOLS
