HAAS VF-6SS 5-AXIS WITH TR3105XB TRUNION
MACHINING CENTERS, VERTICAL
HARD TO FIND HAAS VF-6SS 5-AXIS WITH TR3105XB TRUNION, PART AND TOOL PROBE, 8" RISER ON X, CAT 40 TAPER AND 64/ 32/ 30 TRAVELS.
| X Travel | 64" |
| Y Travel | 32" |
| Z Travel | 30" |
| Spindle Speed | 12000 rpm |
| Tool Capacity (ATC) | 25 |
| Table Size (W) | 64" |
| Table Size (L) | 28" |
| Main Spindle Motor | 30 hp |
| Spindle Taper | CAT 40 |
| Spindle Nose To Table Top | 4" - 32" |
| 5 Axis Programmable Axis's | Full 5 Axis's Contouring |
| Table Type A-Axis Trunnion Tilt Range | TR3105XB |
| Coolant Thru | Yes |
| Coolant Thru High Pressure | Yes |
| Hi Pressure Coolant System | 1000 psi |
| Control | CNC (HAAS) |
| Dimensions | 178" x 135" x 129" |
| Weight | 22,850 LBS |
SPECIFICATIONS:
TABLE WIDTH 28 "
TABLE LENGTH 64 "
MAXIMUM TABLE LOAD 4000 LBS
X-AXIS TRAVEL 64 "
Y-AXIS TRAVEL 32 "
Z-AXIS TRAVEL 30 "
SPINDLE NOSE TO TABLE TOP MINIMUM 4 "
MAXIMUM 32 "
SPINDLE SPEED 0-12000 RPM
SPINDLE TAPER #40
MAIN MOTOR (HP) 30 HP
TOOL CHANGER: TOOL CHANGER POSITIONS 24 ATC
ADDITIONAL SPECS: TOOL CAHNGE TIME (TOOL TO TOOL) 1.6 SECONDS
RAPID TRAVERSE RATE 1,200 IPM
CUTTING FEED RATES 833 IPM
DIEMNSIONS 178" x 135" x 129"
WEIGHT 22,850 LBS.
HAAS 32 BIT/CRT CNC CONTROL
RS-232 INTERFACE
ETHERNET & 40 GIG HARD DRIVE
3.5" FLOPPY DISC DRIVE
VISUAL QUICK CODE PROGRAMMING
PART & TOOL PROBING
REMOTE JOG HANDLE
HAAS TR3105XB 5TH AXIS TABLE
8" RISER (Z-AXIS)
ROTATION & SCALING/SPNDL ORIENTATION
PROGRAMMABLE COOLANT
COOLANT THRU SPINDLE/HIGH PRESSURE (1000 PSI)
POWER FAULT DETECTION
AUTOMATIC CHIP AUGER
24 + 1 POSITION SIDE MOUNT AUTOMATIC TOOL CHANGER
RIGID TAPPING
USB PORT
HIGH-INTENSITY LIGHTING
