HAAS VF-2TR WITH TR160 TRUNION TABLE
MACHINING CENTERS, VERTICAL.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
THE VF-2TR COMES WITH A TR160 TRUNION TABLE - REMOVABLE, 30000 RPM SPINDLE, 4TH 7 5TH AXIS DRIVE & WIRING, 24 STATION SIDE MOUNT TOOL CHANGE, COMPLETE COOLANT SYSTEM WITH TANK & PUMP - NOT CURRENTLY BEING USED BUT AVAILABLE AND AUGER STYLE CHIP CONVEYOR - NOT CURRENTLY BEING USED, BUT AVAILABLE.
| X Travel | 30" |
| Y Travel | 16" |
| Z Travel | 20" |
| Spindle Speed | 30000 rpm |
| Tool Capacity (ATC) | 24 |
| Table Size (W) | 36" |
| Table Size (L) | 14" |
| Main Spindle Motor | 20 hp |
| Spindle Taper | CAT 30 |
| Spindle Nose To Table Top | 4" - 24" |
| Part Probe | Yes |
| Tool Probe/Auto Tool Length Measurement | Yes |
| Rapid Traverse Rates: X Axis Y Axis Z Axis | 1000 IPM |
| Dimensions | 88"x92.5"x104" |
| Weight | 8,000 lbs |
24 STATION SIDE MOUNTED TOOL CHANGER
30,000 RPM SPINDLE OPTION
BT30 TAPER SPINDLE
HAAS TR160 TRUNNION STYLE TABLE - REMOVABLE
4TH AXIS DRIVE & WIRING
5TH AXIS DRIVE & WIRING
HAAS WIRELESS PROBING PACKAGE - BOTH TOOL & PART
TABLE MOUNTED TOOL PROBE EXTENSION
AUGER STYLE CHIP CONVEYOR - NOT CURRENTLY BEING USED ON MACHINE, BUT IT AVAILABLE
COORDINATE ROTATION & SCALING
SPINDLE ORIENTATION
USER DEFINABLE MACROS
HIGH SPEED MACHINING
REMOTE JOG HANDLE
RIGID TAPPING
HIGH INTENSITY LIGHTING
HAAS LOW MAINTENANCE COOLANT
ETHERNET INTERFACE/HARD DRIVE
USB PORT INTERFACE
RS 232 PORT INTERFACE
WIRED 195V/260V ELECTRICS
COMPLETE COOLANT SYSTEM WITH TANK & PUMP- NOT CURRENTLY BEING USED ON MACHINE, BUT IT AVAILABLE
**MACHINE HAS BEEN USED TO ONLY CUT ACRYLIC AND PLASTIC. IT DOES NOT USE COOLANT**
**BOTH CHIP AUGER AND COOLANT TANK WITH PUMP ARE AVAILABLE TO GO WITH MACHINE, CURRENTLY NOT IN USE AND IN STORAGE**
**ONLY 727 MOTION HOURS**
**ONLY 457 SPINDLE HOURS**
