MAZAK INTEGREX i 200SW

MACHINE LIKE NEW!!
CUT HOURS - 239 SPINDLE 1
            104 SPINDLE 2

MAZAK INTEGREX I-200SW / 1000U
NEW 2018

SPECIFICATIONS: (SUBJECT TO BUYER VERIFICATION)
STANDARD CHUCK DIA. MAIN SPINDLE (L)   8"
STANDARD CHUCK DIA. SECOND SPINDLE     (R)8"
MAXIMUM SWING                          25.9"
MAXIMUM SWING OVER CROSS SLIDE.        25.9"
MAXIMUM CUTTING DIAMETER: CHUCKING     25.9"
MAXIMUM CUTTING LENGTH                 39.8"

MAIN SPINDLE SPECIFICATIONS (L):
SPINDLE NOSE                           A2-6
SPINDLE BORE                           4.65"
MAXIMUM BAR WORK                       4.0"
SPINDLE SPEED                          35-5,000 RPM
SPINDLE INDEX (PROGRAMMABLE)           .0.0001 DEG.
360,000 POSITIONS
SPINDLE HORSEPOWER                    (CONT./30 MINS). 20/30 HP (AC)
SPINDLE TORQUE (25% ED).               344.2 FT-LBS.

SECOND SPINDLE SPECIFICATIONS (R):
SPINDLE NOSE                           A2-6
SPINDLE BORE                           2.99"
MAXIMUM BAR WORK.                      2.6
SPINDLE SPEED                          35-5,000 RPM
SPINDLE INDEX (PROGRAMMABLE)           (0.0001 DEG. C-AXIS OPTIONAL)
SPINDLE HORSEPOWER (CONT./30 MINS).    20/25 HP (AC)
SPINDLE TORQUE (30 MIN.)               240 FT-LBS.

TURRET AND TOOLING SPECIFICATIONS:
TYPE OF TURRET.                        1 POSITION W/ATC
MAGAZINE CAPACITY                      110 TOOLS
TOOL SELECTION METHOD                  RANDOM SHORTEST PATH
TOOL TO TOOL ATC TIME                  1.3 SEC.
MAX. TOOL DIA. W/ALL POCKETS FULL      3.54"
MAX. TOOL DIA. W/ADJ POCKETS EMPTY     4.92"
MAX. TOOL LENGTH (FROM GAGE-LINE)      15.75"
MAXIMUM TOOL WEIGHT                    26.5 LBS.
ATC TOOL SHANK..                       CAPTO
ROTARY TOOL SPINDLE SPEED              15-12,000 RPM
ROTARY TOOL SPINDLE HP (20% ED)        30 HP (AC)
ROTARY TOOL TORQUE   20% ED)           88.5 FT-LBS

AXIS TRAVELS:
B-AXIS                                240 DEGREES
           (-30 DEG. TO +210 DEG. 0.0001 DEGREE       INCREMENTS)
Y-AXIS.                               9.84"
X-AXIS.                               24.21"
Z-AXIS                                42.4"
SECOND HEADSTOCK W-AXIS               41.97"

AXIS RAPID RATES:
X & Z-AXIS                            1969 IPM
Y-AXIS.                               1575 IPM
SECOND HEADSTOCK W-AXIS               1181 IPM
B-AXIS                                40 RPM
C-AXIS                                555 RPM

GENERAL SPECIFICATIONS:
FLOOR SPACE (WXL)                     110.24" X 157.1"
MACHINE HEIGHT                        107.1"
TOTAL POWER REQUIRED (MACHINE ONLY)   62.61 KVA
NOTE: ACTUAL MACHINE MAIN TRANSFORMER
KVA RATING WILL BE GREATER.
AIR REQUIREMENTS.                     71 PSI/12.7 CFM
MACHINE WEIGHT (36T).                 28,880 LBS.

CONTROL OPTIONS LIST:
EIA                      SUB C-AXIS COORDINATE ROTATION
HIGH SMOOTHING CONTROL   AUTO TLM
EIA 3D COMP              POLAR COORDINATES INPUT
ROTATION                 COMPARISON STOP
GEOMETRIC                G54. 1
SCALING                  SYNCHRONOUS MILL TAPPING
EXT-DATA I/O             INCH / METRIC CONVERSION
HIGH SPEED               ROT-AXIS SHAPE COMP.
SHAPE COMP.              G00 SLOPE CONST.
THREAD VARIABLE          600 SETS
CYLINDER & POLAR CO-OR INT.  EIA HELICAL TAP CYCLE
EIA PATTERN CYCLE        2ND AUX FUNCTIONS
TILTED WORK PLANE        5-AXIS TOOL LENGTH COMP.
SEAMLESS CORNER CONTROL  VARIABLE ACC CONTROL
SUPER HIGH SPEED RAPID OVERLAP
AUTOMATIC OPERATION ISS  ENGRAVING