CNC LATHES 2 AXIS

DOOSAN PUMA 230C CNC LATHE, FANUC 21iT CONTROL, TAILSTOCK, BARFEED INTERFACE, 10" KITAGAWA CHUCK.

DAEWOO PUMA 300LC CNC LATHE COMES WITH A FANUC 21iT CONTROL, 50" CENTERS,, LNS PROGRAMMABLE STEADY REST, TAILSTOCK AND 12" CHUCK WITH 4.5" BAR CAPACITY.

DAEWOO PUMA 400B FEATURES A FANUC 18T CONTROL, 18" 3-JAW HYDRAULIC CHUCK, TAILSTOCK AND 40" CENTERS.

THIS 2020 NLX 2500 - LIKE NEW - IMMEDIATELY AVAILABLE.

HERE'S A DOOSAN PUMA 300LC CNC LATHE WITH DOOSAN FANUC CONTROL, 12" CHUCK, 4" BAR WORK AND TAILSTOCK.

THIS 2011 DOOSAN PUMA 400B CNC LATHE FEATURES A FANUC 21iTB CONTROL, 21" CHUCK, 5.2" BORE AND A 2000 RPM SPINDLE.

THIS DOOSAN PUMA 400LC CNC LATHE COMES WITH A 21" CHUCK, 6.5" BAR WORK, 80" CENTERS, FANUC 21i-TB CONTROL, STEADY REST AND TAILSTOCK.

THIS DOOSAN PUMA 4100LB CNC LATHE INCLUDES A 18" SAMCHULLY CHUCK WITH 4.6" BAR CAPACITY, FANUC CONTROL AND SMW STEADY REST.

THIS DOOSAN PUMA 480 HAS A 24" CHUCK WITH 6.5' BAR CAP, FANUC 32i CONTROL WITH 1500 RPM SPINDLE.

THIS 2012 DOOSAN PUMA 480L CNC LATHE HAS 80" CENTERS WITH 24" CHUCK AND 6.5" BAR CAPACITY AND STEADY REST.

THIS PUMA 480XL HAS A FANUC 32i-A SERIES CNC CONTROL, 120" CENTERS, 24" SAMCHULLY CHUCK WITH A 7.1" BORE & 6.5" BAR CAP, SMW HYDRAULIC STEADY AND LOW HOURS.

THIS 2015 DOOSAN PUMA 480XL CNC TURNING CENTER WITH COOLANT THRU, 21" 3-JAW CHUCK (NEW IN BOX), 32" 4-JAW CHUCK, SAMCHULLY STEADY REST AND FANUC 32iA CONTROL.

DOOSAN PUMA 5100C LARGE SWING 10.8 BIG BORE FRONT AND BACK CHUCKS 80" CENTERS

THIS 2013 DOOSAN PUMA 700L CNC LATHE FEATURES A FANUC 32i CONTROL, TAILSTOCK AND 21" CHUCK WITH 7" BORE AND SCHUNK STEADY REST

THIS FEMCO HL-55S CNC LATHE WITH A FANUC 0I CONTROL HAS 40" CENTERS, A 15" CHUCK WITH 4.53" BAR CAP AND 2 SPEED GEARED HEADSTOCK.

HERE'S A HAAS SL 20T WITH AN 8.3" CHUCK, 2" BAR CAP, PARTS CATCHER, CHIP AUGER AND SWINGS 20"

THIS HAAS SL 30TB BIG BORE HAS A 4" BAR CAP, 15" HYDRAULIC CHUCK, PARTS CATCHER AND FULLY PROGRAMMABLE TAILSTOCK.

THIS HAAS ST 30 LATHE HAS A 10" CHUCK, RIGID TAPPING ALONG WITH A 6000 RPM SPINDLE AND 26" CENTERS.

THIS HAAS ST 40LBB HAS 80" CENTERS, 20" CHUCK WITH A 7" BORE, PROGRAMMABLE TAILSTOCK, UPGRADED 55 HP SINDLE AND A STEADY REST FOR BIG PARTS.

SUPER CLEAN 2019 HAAS ST-10T CNC LATHE WITH HAAS BAR FEEDER, TAILSTOCK, PARTS CATCHER, CHIP CONVEYOR. ONLY 347 CUTTING HOURS AS OF OCTOBER.

THIS HAAS ST 40L HAS A 7" BIG BORE OPTION AND 80" CENTERS, STEADY REST, BISON 20" 3 JAW SCROLL CHUCK, 300 PSI COOLANT THRU AND A 1400 RPM SPINDLE.

THIS HAAS TL 3B FLATBED HAS A 8.5" BORE, 60" CENTERS, DUAL 25" BISON CHUCKS WITH A 650 RPM SPINDLE AND HAAS INTUITIVE PROGRAMMING SYSTEM.

THIS HARDINGE CONQUEST T-42 CNC LATHE with LIVE TOOLING AND 6 POSITION END WORKING TURRET HAS AN 8" POWERHOLD CHUCK AND 16C COLLET, 12 POSITION UPPER TURRET WITH 6 LIVE STATIONS.

THIS HYUNDAI KIA SKT 210Y INCLUDES AN 8" CHUCK FOR UP TO 2" BAR WORK, PARTS CATCHER AND LNS BAR FEEDER.

THE HYUNDAI WIA L 300LC COMES WITH 52" CENTERS, A KITAGAWA 12" CHUCK WITH A 3.54" BAR CAPACITY, AND FANUC 0i-TD CNC CONTROL. FULLY PROGRAMABLE STEADY REST AVAILABLE - PRICE TBD.

COMING OUT OF AN AEROSPACE FACILITY, THIS LEADWELL LTC 30-CPL 2 AXIS SLANT BED LATHE HAS A FANUC CONTROL, 15" CHUCK FOR UP TO 4.5" BAR WORK AND TAILSTOCK.

THE M-4N IS A 60" FLATBED WITH AN 8 STATION TURRET IN FRONT AND 6 IN REAR, 12" KITAGAWA HYDRAULIC CHUCK AND TAILSTOCK.

THE M-5 IS A FLATBED DESIGN WITH 100" BETWEEN CENTERS, 22" SMW AIR CHUCK, FULL 7.1" BORE, 2 STEADY RESTS AND A MAZATROL FUSION 640 CONTROL.

THE M-5 FLATBED LATHE HAS 80" CENTERS WITH A 7.1" SPINDLE BORE OPTION, A REAR CHUCK AND MAZATROL FUSION 640T CONTROL.