Filters
DAEWOO (2)
DMG MORI (2)
DMG-MORI (4)
DOOSAN (12)
HAAS (2)
HYUNDAI KIA (1)
MAZAK (116)
MORI SEIKI (22)
NAKAMURA TOME (1)
NAKAMURA-TOME (1)
OKUMA (7)
Maximum Swing (in)
Max Turning Diameter (in)
Main Spindle Bore/Max Bar Capacity
Tail Stock/Sub Spindle
Maximum Swing Over Cross Slide (in)
Distance Between Centers (in)
Maximum Cutting Length (in)
Distance Between Spindles (in)
Max Shaft Diameter (in)
X-Axis Travel (X1, X2, X3)
Z-Axis Travel (Z1, Z2, Z3)
Y-Axis Travel (Y1, Y2, Y3)
More…
Sort By
DAEWOO PUMA 240MC WITH LIVE TOOLING CNC LATHE INCLUDES TAILSTOCK, FANUC 21I-TB, CONTROL 10" CHUCK (NEW IN BOX), WITH 3" BAR CAPACITY.
21.7in
Maximum Swing
19.7in
Max Turning Diameter
3.54/ 3.03
Main Spindle Bore/Max Bar Capacity
Tail Stock
Tail Stock/Sub Spindle
.jpg)
DAEWOO PUMA 240MSB MULTI AXIS CNC LATHE INCLUDES A FANUC 18i-TB CONTROL, FULL C AXIS, LNS BAR FEEDER, PARTS CATCHER, 5c ROYAL COLLET CHUCKS MAIN/SUB AND CHIP CONVEYOR.
21.7in
Maximum Swing
11.4in
Max Turning Diameter
2.99/ 2.68
Main Spindle Bore/Max Bar Capacity
Sub Spindle
Tail Stock/Sub Spindle
.jpg)
DMG MORI CTX GAMMA 2000TC MULTI TASKING TURNING AND MILLING CENTER
CNC LATHES MULTI AXISStock #: 5896
Used - Good
THIS 2013 DMG MORI CTX GAMMA 2000TC HAS A 43 HP HI-TORQUE B-AXIS SPINDLE, 5 AXIS SIMULTANEOUS MACHINING, HIGH PRESSURE DUAL 300 PSI PUMPS, 16" & 13" SMW CHUCKS, SMW STEADY REST SLU 5.1 AND 80" CEN...
27.6in
Maximum Swing
27.6in
Max Turning Diameter
4.1/ 3.5
Main Spindle Bore/Max Bar Capacity
Sub Spindle
Tail Stock/Sub Spindle
.jpg)
DMG MORI NZX 2000/800SY TWIN SPINDLE, TWIN TURRET LATHE
CNC LATHES MULTI AXISStock #: 5895
Used - Excellent
THIS 2016 NZX 2000/ 800SY HAS 2 - 16 STATION TURRETS, TWIN SPINDLES WITH 8" CHUCKS, 300 PSI COOLANT THRU, HOBBING, MAPPS CONVERSATIONAL PROGRAMMING AND A BOAT LOAD OF TOOLING!
31.5in
Maximum Swing
12.5in
Max Turning Diameter
2.99/ 2.5
Main Spindle Bore/Max Bar Capacity
Sub Spindle
Tail Stock/Sub Spindle
.jpg)
THIS 2018 DMG MORI NLX 1500Y/500 CNC LATHE FEATURES A CELOS CONTROL, 2 LIVE TOOL HOLDERS, 0.0001 C-AXIS, 6" CHUCK, 6000 RPM AND 1000 PSI CHIPBLASTER.
36.4in
Maximum Swing
15.1in
Max Turning Diameter
2.4/ 2.0
Main Spindle Bore/Max Bar Capacity
Tail Stock
Tail Stock/Sub Spindle
.jpg)
THIS 2016 DMG MORI 2500SY/ 700 CNC LATHE, CELOS M730UM CONTROL, KITAGAWA 10" & 6" CHUCKS, SUB-SPINDLE, 5 LIVE TOOL HOLDERS AND IS PREPPED FOR A BAR FEEDER.
36.2in
Maximum Swing
14.01in
Max Turning Diameter
3.58/ 3.1
Main Spindle Bore/Max Bar Capacity
Sub Spindle
Tail Stock/Sub Spindle
THIS DMG MORI NLX2500SY/1250 CNC TURNING CENTER WITH SUB-SPINDLE AND Y AXIS, LNS BARFEEDER, PARTS CATCHER, CHIP CONVEYOR AND DMG MORI CELOS CONTROL, 2015.
23.2in
Maximum Swing
14.4in
Max Turning Diameter
3.0/ 2.55
Main Spindle Bore/Max Bar Capacity
Sub Spindle
Tail Stock/Sub Spindle
THIS SUPER CLEAN DMG-MORI NLX-2500MC/ 700 CNC LATHE, 3" BAR WORK, CELOS CONTROL, 10" KITAGAWA CHUCK AND FULL C-AXIS, 2014.
31in
Maximum Swing
14.4in
Max Turning Diameter
3.6/ 3.0
Main Spindle Bore/Max Bar Capacity
Tail Stock
Tail Stock/Sub Spindle
.jpg)
THIS WELL MAINTAINED DOOSAN PUMA 2100SY MULTI AXIS CNC LATHE FEATURES FANUC 21T CONTROL, FULL C-AXIS, 3 JAW CHUCK AND CAN HANDLE UP TO 2.6" BAR WORK. 2011.
30.7in
Maximum Swing
16in
Max Turning Diameter
3.0/ 2.6
Main Spindle Bore/Max Bar Capacity
Sub Spindle
Tail Stock/Sub Spindle
.jpg)
THIS DOOSAN PUMA 2600LY CNC LATHE HAS LIVE TOOLING , 50" CENTERS, HYDRAULIC STEADY REST, HIGH PRESSURE COOLANT THRU, FANUC 0iTD CONTROL AND Y-AXIS. 2012
30.7in
Maximum Swing
14.8in
Max Turning Diameter
3.5/ 3.0
Main Spindle Bore/Max Bar Capacity
TAILSTOCK
Tail Stock/Sub Spindle
THIS DOOSAN PUMA 2600MS CNC LATHE HAS MILLING AND SUB SPINDLE, DOOSAN FANUC CONTROL, FULL C-AXIS AND CAN HANDLE 3" BAR WORK.
30.7in
Maximum Swing
14.8in
Max Turning Diameter
3.5/ 3.0
Main Spindle Bore/Max Bar Capacity
Sub Spindle
Tail Stock/Sub Spindle
.jpg)
THIS DOOSAN PUMA 300LMC CNC LATHE WITH MILLING & STEADY REST INCLUDES FANUC 32iA CONTROL, TAILSTOCK, 4 X-AXIS ROTARY HEADS, 12" CHUCK, 4" BAR WORK AND 50" CENTERS.
23in
Maximum Swing
15.8in
Max Turning Diameter
4.53/ 4.0
Main Spindle Bore/Max Bar Capacity
Tail Stock
Tail Stock/Sub Spindle
THIS DOOSAN PUMA 3100 ULY LATHE COMES WITH STEADY REST, 4" BAR, 123" CENTERS, Y-AXIS, 15" SAMCHULLY CHUCK, 300 PSI COOLANT THRU, TAILSTOCK, LIVE TOOLING AND A FANUC CONTROL.
33.46in
Maximum Swing
16.53in
Max Turning Diameter
4.52/ 4.05
Main Spindle Bore/Max Bar Capacity
Tail Stock
Tail Stock/Sub Spindle
.jpg)
THIS DOOSAN PUMA 3100LMY 5 AXIS CNC LATHE FEATURES A FANUC iT CONTROL, 51" CENTERS, 4" BAR, Y-AXIS, PARTS CATCHER, TAILSTOCK AND BARFEED INTERFACE. 2011.
33.5in
Maximum Swing
16.5in
Max Turning Diameter
4.5/ 4.0
Main Spindle Bore/Max Bar Capacity
Tail Stock
Tail Stock/Sub Spindle
THIS BIG DOOSAN PUMA 480LM CNC LATHE WITH FANUC CONTROL HAS 80" CENTERS, TAILSTOCK, 24" HYDRAULIC CHUCK, STEADY REST AND A 6.62" BAR CAPACITY.
35.4in
Maximum Swing
25.54in
Max Turning Diameter
7.12/ 6.62
Main Spindle Bore/Max Bar Capacity
Tail Stock
Tail Stock/Sub Spindle
.jpg)
HERE'S A 2013 DOOSAN PUMA 600LM CNC TURNING AND MILLING CENTER WITH A FANUC 31iT CONTROL, STEADY REST, 21" CHUCK AND 5.98" BORE.
40.5in
Maximum Swing
35.4in
Max Turning Diameter
5.98/ 5.0
Main Spindle Bore/Max Bar Capacity
Tail Stock
Tail Stock/Sub Spindle
DOOSAN PUMA 700LM CNC TURNING AND MILLING WITH HYDRAULIC STEADY REST
CNC LATHES MULTI AXISStock #: 4209
THIS DOOSAN PUMA 700LM CNC TURNING AND MILLING WITH HYDRAULIC STEADY REST FEATURES A FANUC 21iTB CONTROL WITH A 32" 3-JAW HYDRAULIC CHUCK WITH A 7" BORE AND TAILSTOCK.
40.5in
Maximum Swing
35.4in
Max Turning Diameter
7.12/ 6.5
Main Spindle Bore/Max Bar Capacity
Tail Stock
Tail Stock/Sub Spindle
.jpg)
THIS DOOSAN PUMA MX-1600ST MULTI AXIS CNC LATHE, FANUC 31iB CONTROL, C-AXIS, B-AXIS, BAR FEEDER, PARTS CATCHER, HIGH PRESSURE COOLANT AND 6" CHUCK AND COLLET CHUCK ON SUB.
26.8in
Maximum Swing
13in
Max Turning Diameter
2.44/ 2.0
Main Spindle Bore/Max Bar Capacity
Sub Spindle
Tail Stock/Sub Spindle
HERE'S A DOOSAN MX 2100ST MULTI AXIS CNC LATHE WITH FANUC 31i CONTROL, FULL CONTOURING C-AXIS, B-AXIS, EXTENDED Y-AXIS AND SPEEDY 1417 IPM RAPIDS.
29.5in
Maximum Swing
21.25in
Max Turning Diameter
2.99/ 2.68
Main Spindle Bore/Max Bar Capacity
Sub Spindle
Tail Stock/Sub Spindle
.jpg)
THIS DOOSAN PUMA TT2500SY MULTI AXIS TWIN TURRET CNC LATHE WITH Fanuc 31i-B CONTROL INCLUDES (2) KITAGAWA 10" CHUCKS AND (2) COLLET CHUCKS WITH 3" BAR CAP., 1000 PSI CHIP BLASTER AND TOOLING.
31.5in
Maximum Swing
15.35in
Max Turning Diameter
3.54/ 3.0
Main Spindle Bore/Max Bar Capacity
Sub Spindle
Tail Stock/Sub Spindle
.jpg)
THIS 2014 HAAS DS-30SSY IS A DUAL SPINDLE LATHE WITH Y AXIS WITH 8" CHUCK, 3" BIG BORE OPTION, 300 PSI COOLANT THRU, CHIP CONVEYOR AND A BUNCH OF TOOLING.
31.75in
Maximum Swing
16in
Max Turning Diameter
3.0/ 2.625
Main Spindle Bore/Max Bar Capacity
Sub Spindle
Tail Stock/Sub Spindle
.jpg)
EXCEPTIONAL 2019 HAAS ST 30Y WITH VERY LOW HOURS COMES WITH A 12" CHUCK, 6000 RPM LIVE TOOLING UPGRADE, 6 LIVE TOOLS, BORING BAR HOLDERS, PARTS CATCHER, TAILSTOCK, BARFEEDER AND CHIP CONVEYOR.
31.75in
Maximum Swing
26in
Max Turning Diameter
3.46/ 3.0
Main Spindle Bore/Max Bar Capacity
Tail Stock
Tail Stock/Sub Spindle
THIS HYUNDAI-KIA SKT 21LMS COMES WITH AN 8" & 5" SAMCHULLY POWER GRIP CHUCKS, SUB-SPINDLE, PARTS CATCHER AND PREPPED FOR A BAR FEEDER. IT COMES EQUIPPED WITH A FANUC 0i-TC CNC CONTROL AND SEVERAL L...
21.7in
Maximum Swing
10.2in
Max Turning Diameter
3.1/ 2.56
Main Spindle Bore/Max Bar Capacity
Sub Spindle
Tail Stock/Sub Spindle
.jpg)
THIS CYBERTECH 4500M HAS A 120" BED, HYDRAULIC STEADY REST, LONG BORING BAR STOCKER, A 10.8" SPINDLE BORE AND MAZATROL FUSION 640MT PRO CONTROL.
33.88in
Maximum Swing
31.88in
Max Turning Diameter
10.8
Main Spindle Bore/Max Bar Capacity
Tail Stock
Tail Stock/Sub Spindle
.jpg)
THIS CYBERTECH 4500M HAS 120" CENTERS, FUSION 640MT CONTROL, 22" AIR CHUCK WITH 9.1" BORE IN FRONT, 18" MANUAL ON BACK, LONG BORING BAR STOCKER,SMW STEADY REST AND 213 PSI COOLANT THRU.
33.88in
Maximum Swing
31.88in
Max Turning Diameter
9.1"/7.28'
Main Spindle Bore/Max Bar Capacity
Tail Stock
Tail Stock/Sub Spindle
THIS CYBERTECH 5500M HAS 120" CENTERS, FUSION 640MT CONTROL, 33" EXTENDED STROKE AIR CHUCK, SMW STEADY REST, LONG BORING BAR STOCKER, 31" REAR CHUCK AND 213 PSI COLANT THRU.
36in
Maximum Swing
31.9in
Max Turning Diameter
14.8/ 14.8
Main Spindle Bore/Max Bar Capacity
Tail Stock
Tail Stock/Sub Spindle
.jpg)
THE DUAL TURN 20 IS A TWIN SPINDLE/ TWIN TURRET LATHE WITH 8" HYDRAULIC CHUCK PACKAGE (L&R), AUTOMATIC WORKPIECE TRANSFER, 5000 RPM SPINDLE AND MAZATROL FUSION 640T.
12.6in
Maximum Swing
10in
Max Turning Diameter
2.4/ 2.0
Main Spindle Bore/Max Bar Capacity
N/A
Tail Stock/Sub Spindle
2015 MAZAK HQR-100MSY Multi-Tasking turning center features a highly productive twin-spindle, twin-turret configuration for unequaled part processing opportunities and high-volume throughput. It ma...
12.6in
Maximum Swing
11.625in
Max Turning Diameter
2.4/ 2.0
Main Spindle Bore/Max Bar Capacity
Sub Spindle
Tail Stock/Sub Spindle
.jpg)
MAZAK 2012 HQR 150MSY Multi-Tasking turning center features a highly productive twin-spindle, twin-turret configuration for unequaled part processing opportunities and high-volume throughput. It ma...
12.6in
Maximum Swing
11.6256in
Max Turning Diameter
2.99/ 2.6
Main Spindle Bore/Max Bar Capacity
Sub Spindle
Tail Stock/Sub Spindle
.jpeg)
THIS HQR 200MSY IS A TWIN SPINDLE, TWIN TURRET LATHE WITH MATRIX CONTROL, 8" BB CHUCK WITH 2.56", BAR CAPACITY, Y AXIS, 213 PSI COOLANT AND LNS BARFEEDER.
14.56in
Maximum Swing
13.4in
Max Turning Diameter
2.99/ 2.56
Main Spindle Bore/Max Bar Capacity
Sub Spindle
Tail Stock/Sub Spindle