MOMENTUM 49” MVL-12 CNC VTL W/ MILLING & LIVE TOOLING, HARDLY USED 2012 NOT SHIPPED UNTIL 2018
Have one to sell?
ConditionUsed
1 available
THE MACHINE WAS NEVER INSTALLED UNTIL 2018 - THE MOMENTUM MVL-12 WITH MILLING AND LIVE TOOLING HAS A FANUC 0i CONTROL, 2-SPEED GEAR HEAD, 5 TOOL HOLDERS, AND SWINGS 63" IN X.
X-AXIS TRAVEL – RAM LEFT / RIGHT 71.65”
Z-AXIS TRAVEL – SPINDLE UP / DOWN 35.43”
CROSS RAIL TRAVEL UP / DOWN 19.68” – 3 POSITIONS / 2 STEPS
MAX SWING DIAMETER 63”
MAX TURNING DIAMETER 63”
MAX TURNING HEIGHT 47.24”
CROSS SECTION OF RAM 7.87” X 7.87”
TABLE FEATURES
DIMENSIONS 49.2” DIAMETER
MAXIMUM WORKPIECE WEIGHT 17,637 LBS
RAM BOTTOM TO TABLE TOP MAX 0-47.44”
LOW GEAR TABLE SPEED 34-103 PM
HIGH GEAR TABLE SPEED 104 – 312 RPM
MAX TABLE TORQUE 9145 FT.LB
RAPID TRAVERSE FEEDRATE
X-AXIS 393.7 IPM
Z-AXIS 393.7 IPM
FLOOD COOLANT SYSTEM
COOLANT TANK CAPACITY 18 GALLONS
POWER REQUIREMENT 480 VOLT, 3 PHASE, 50/60 HZ, 80 KVA
60 / 50 HP (30 MIN / CONTINUOUS)
STANDARD TURNING SPINDLE
TWO-SPEED GEAR HEAD
RPM RANGE 0-312 RPM
STANDARD SPEC 34 ~ 312 (LOW: 34 ~ 103 / HIGH: 104 ~ 312)
HIGH COLUMN SPEC: 24 ~ 288 (LOW: 24 ~ 95 / HIGH: 73 ~ 288)
FANUC 0i
5 TOOL HOLDERS – 2 OD FACING, 1 SOCKET, 1 BURRING, 1 DRILLING
CAT50 ½ DOZEN AVAILABLE
MILLING & LIVE TOOLING
CHIP CONVEYOR
MANUALS
APPROXIMATELY 630 RUN TIME HOURS
NOTE: BLUE HOIST IN FRONT OF THE MACHINE NOT INCLUDED
We use cookies to improve your experience. Privacy Policy.