THIS BROTHER TCS2DN 4 AXIS DRILLING & TAPPING CENTER – USED PRIMARILY IN THE MEDICAL INDUSTRY, COMES WITH A B00 CNC CONTROL, 21 POSITION ATC, 10K RPM SPINDLE, CAT 30 TAPER AND 6” ROTARY TABLE – 2013.

USED CINCINNATI MAXIM 500 COMES WITH (8) 19.7” PALLETS, A FULL 4TH AXIS, THRU SPINDLE COOLANT AND 120 ATC.

THIS CITIZEN A 16IV SWISS TYPE LATHE CREATES COMPLEX PARTS AND OFFERS GREATER WORKPIECE VERSATILITY. INCLUDES A FANUC CONTROL AND LNS BAR FEEDER.

DAEWOO ACE H 100 HORIZONTAL MACHINING CENTER INCLUDES A FANUC 16MC CONTROL, COOLANT THRU SPINDLE AND (2) 1000MM PALLETS (39.4").

THIS DAEWOO DHC 400 HORIZONTAL FEATURES A FANUC 21TI-MB CONTROL, 2 PALLETS, COOLANT THRU SPINDLE, 10000 RPM SPINDLE AND RIGID TAP.

DOOSAN PUMA 230C CNC LATHE, FANUC 21iT CONTROL, TAILSTOCK, BARFEED INTERFACE, 10" KITAGAWA CHUCK.

DAEWOO PUMA 240MC WITH LIVE TOOLING CNC LATHE INCLUDES TAILSTOCK, FANUC 21I-TB, CONTROL 10" CHUCK (NEW IN BOX), WITH 3" BAR CAPACITY.

DAEWOO PUMA 240MSB MULTI AXIS CNC LATHE INCLUDES A FANUC 18i-TB CONTROL, FULL C AXIS, LNS BAR FEEDER, PARTS CATCHER, 5c ROYAL COLLET CHUCKS MAIN/SUB AND CHIP CONVEYOR.

DAEWOO PUMA 300LC CNC LATHE COMES WITH A FANUC 21iT CONTROL, 50" CENTERS,, LNS PROGRAMMABLE STEADY REST, TAILSTOCK AND 12" CHUCK WITH 4.5" BAR CAPACITY.

DAEWOO PUMA 400B FEATURES A FANUC 18T CONTROL, 18" 3-JAW HYDRAULIC CHUCK, TAILSTOCK AND 40" CENTERS.

THIS DECKEL MAHO DMC 100U DUOBLOCK 5 AXIS HORIZONTAL/VERTICAL MACHINING CENTER FEATURES A HEIDENHAIN ITNC 530 5 AXIS CONTROL, 120 ATC, RENISHAW PROBE, BLUM LASER TOOL MEASUREMENT SYSTEM, 2 TSUDAKOM...

THIS DECKEL MAHO DMC 100U DUOBLOCK 5-AXIS CNC HORIZONTAL FEATURES A HEIDENHAIN 3D CONTOURING ITNC 530 FULL 5 AXIS CNC CONTROL, (6) 39.4" x 31.5" PALLETS, B-AXIS SWIVELING HEAD, 120 STATION ATC, 18,...

WELL MAINTAINED DECKEL MAHO DMF 260 (Y1100) LINEAR 5 AXIS VERTICAL, TRAVELING COLUMN, 2014 COMES WITH A 4 JAW MANUAL CHUCK, 3D-SIEMENS SINUMERIK 840D CONTROL, KOMA RCB-450 WITH 10.5" THRU HOLE, AND...

HERE'S A DMG DMU 100 MONOBLOCK HORIZONTAL/ VERTICAL CNC EQUIPPED WITH A Heidenhain iTNC-530 CONTROL, NC ROTARY TABLE INTEGRATED INTO FIXED TABLE, NC ROTARY TABLE (C-AXIS) NC_CONTROLLED SWIVEL MILLI...

A DMG DMU 80FD duoBLOCK HORIZONTAL WITH HEIDENHAIN 3D MILLPLUS IT CNC CONTROL, 12000 RPM, 60 ATC, BLUM LASER CONTROL NT-H 3D LASER SYSTEM (MILLING TOOLS), 3D TOUCH-PROBE (TURNING TOOLS), HEIDENHAIN...

THIS 2013 DMG MORI CTX GAMMA 2000TC HAS A 43 HP HI-TORQUE B-AXIS SPINDLE, 5 AXIS SIMULTANEOUS MACHINING, HIGH PRESSURE DUAL 300 PSI PUMPS, 16" & 13" SMW CHUCKS, SMW STEADY REST SLU 5.1 AND 80" CEN...

THIS 2016 NHX 5500 HAS A FULL 4TH AXIS, 4 CHANNEL 4000 PSI HYDRAULICS HI-FLOW OVERHEAD WORK HOLDING, BIG PLUS CAT 50/ 8000 RPM SPINDLE, AND CHIP BLASTER HIGH PRESSURE COOLANT.

THIS 2016 NZX 2000/ 800SY HAS 2 - 16 STATION TURRETS, TWIN SPINDLES WITH 8" CHUCKS, 300 PSI COOLANT THRU, HOBBING, MAPPS CONVERSATIONAL PROGRAMMING AND A BOAT LOAD OF TOOLING!

REALLY NICE DMG MORI DMC 1035V ECOLINE VERTICAL, FROM 2013, 40 x 20 x 20 WITH A CAT 40/ 12000 RPM SPINDLE FEATURING A DMG-MORI MB 730 CNC CONTROL.

THIS DMG DMU 125P DUOBLOCK/ 5 AXIS, FEATURES A SIEMENS 840D CONTROL, NEW IN 2014, SIMULTANEOUS FIVE (5) AXIS/ FIVE (5) SIDED MACHINING, FULL B-AXIS, FULL NC SWIVEL/ TILT ROTARY TABLE, 60 ATC AND A ...

THIS DMG MORI DMU 60 EVO LINEAR 5-AXIS VERTICAL, 2016 FEATURES A CELOS SIEMENS 840D CONTROL, NC ROTARY TABLE WITH SWIVEL AXIS, 60 TOOL ATC, AND 18,000 RPM HSK-A63 SPINDLE.

THIS DMG MORI DMU65 monoBLOCK 5 AXIS VERTICAL COMES WITH HEIDENHAIN iTNC 530 CNC CONTROL, 60 TOOL ATC, TRUNNION TABLE, HSK 63/ 18000 RPM SPINDLE AND BLUM LASER.

VERY LOW HOUR 2019 DMG MORI NHX 4000 HORIZONTAL WITH (2) 15.75" PALLETS, UPGRADED 60 ATC, HSK 63/ 15000 RPM SPINDLE, CHIP BLASTER, RENISHAW OPTICAL PROBE AND FANUC FS31I-B W/MAPPS CONTROL.

THIS MORI SEIKI NHX 8000 4 AXIS HORIZONTAL, 2016, FANUC CELOS CNC CONTROL, FULL 4TH AXIS, 1000 PSI COOLANT THRU, FULL B AXIS AND 2 RENISHAW PROBES.

THIS 2018 DMG MORI NLX 1500Y/500 CNC LATHE FEATURES A CELOS CONTROL, 2 LIVE TOOL HOLDERS, 0.0001 C-AXIS, 6" CHUCK, 6000 RPM AND 1000 PSI CHIPBLASTER.

THIS 2016 DMG MORI 2500SY/ 700 CNC LATHE, CELOS M730UM CONTROL, KITAGAWA 10" & 6" CHUCKS, SUB-SPINDLE, 5 LIVE TOOL HOLDERS AND IS PREPPED FOR A BAR FEEDER.

THIS DMG MORI NLX2500SY/1250 CNC TURNING CENTER WITH SUB-SPINDLE AND Y AXIS, LNS BARFEEDER, PARTS CATCHER, CHIP CONVEYOR AND DMG MORI CELOS CONTROL, 2015.

THIS SUPER CLEAN DMG-MORI NLX-2500MC/ 700 CNC LATHE, 3" BAR WORK, CELOS CONTROL, 10" KITAGAWA CHUCK AND FULL C-AXIS, 2014.

HERE'S A DOOSAN DHP 4000/ 4 AXIS HORIZONTAL WITH A FANUC 18iM CNC CONTROL, 60 ATC, BIG PLUS SPINDLE, 230 PSI COOLANT THRU - PREPPED FOR 1000.

THIS DOOSAN DNM 750-II VERTICAL CNC FEATURES A FANUC i-SERIES CONTROL WITH 300 PSI COOLANT THRU SPINDLE, 64" X 30" X 25.6" TRAVELS, A BIG PLUS CAT 40/ 12000 RPM SPINDLE.