DOOSAN

HERE'S A DOOSAN DHP 4000/ 4 AXIS HORIZONTAL WITH A FANUC 18iM CNC CONTROL, 60 ATC, BIG PLUS SPINDLE, 230 PSI COOLANT THRU - PREPPED FOR 1000.

THIS DOOSAN DNM 750-II VERTICAL CNC FEATURES A FANUC i-SERIES CONTROL WITH 300 PSI COOLANT THRU SPINDLE, 64" X 30" X 25.6" TRAVELS, A BIG PLUS CAT 40/ 12000 RPM SPINDLE.

THIS DOOSAN MV 3016L CNC VERTICAL HAS A FANUC 0i-MC CONTROL, 30" X 16" X 20" TRAVELS, CAT 40 SPINDLE AND 30 ATC.

HERE'S A DOOSAN NHM 5000/ 4 AXIS CNC HORIZONTAL WITH FANUC 31iB CNC CONTROL, (2) 19.7" PALLETS, (2) TOMBSTONES, 1000 PSI COOLANT THRU AND A BIG PLUS CAT 50/ 6000 RPM SPINDLE.

THIS WELL MAINTAINED DOOSAN PUMA 2100SY MULTI AXIS CNC LATHE FEATURES FANUC 21T CONTROL, FULL C-AXIS, 3 JAW CHUCK AND CAN HANDLE UP TO 2.6" BAR WORK. 2011.

THIS DOOSAN PUMA 2600LY CNC LATHE HAS LIVE TOOLING , 50" CENTERS, HYDRAULIC STEADY REST, HIGH PRESSURE COOLANT THRU, FANUC 0iTD CONTROL AND Y-AXIS. 2012

THIS DOOSAN PUMA 2600MS CNC LATHE HAS MILLING AND SUB SPINDLE, DOOSAN FANUC CONTROL, FULL C-AXIS AND CAN HANDLE 3" BAR WORK.

THIS PUMA 2600SY HAS A FANUC CONTROL, (2) X-AXIS ROTARY HEADS & (2) Z AXIS ROTARY HEADS, 10" 7 8" CHUCKS, BAR FEEDER AND PARTS CATCHER.

THIS 2020 PUMA 2600SY IS EQUIPPED WITH A FANUC 0iT CONTROL, TURBO REAR DISCHARGE CHIP CONVEYOR, REAR COOLANT TANK, BARFEEDER, (3) ER32 X-AXIS STRAIGHT MILLING TOOLS AND (2) ER32 Z-AXIS (BOTH SIDES ...

HERE'S A DOOSAN PUMA 300LC CNC LATHE WITH DOOSAN FANUC CONTROL, 12" CHUCK, 4" BAR WORK AND TAILSTOCK.

THIS DOOSAN PUMA 300LMC CNC LATHE WITH MILLING & STEADY REST INCLUDES FANUC 32iA CONTROL, TAILSTOCK, 4 X-AXIS ROTARY HEADS, 12" CHUCK, 4" BAR WORK AND 50" CENTERS.

THIS DOOSAN PUMA 3100 ULY LATHE COMES WITH STEADY REST, 4" BAR, 123" CENTERS, Y-AXIS, 15" SAMCHULLY CHUCK, 300 PSI COOLANT THRU, TAILSTOCK, LIVE TOOLING AND A FANUC CONTROL.

THIS DOOSAN PUMA 3100LMY 5 AXIS CNC LATHE FEATURES A FANUC iT CONTROL, 51" CENTERS, 4" BAR, Y-AXIS, PARTS CATCHER, TAILSTOCK AND BARFEED INTERFACE. 2011.

THIS 3100LY HAS 50' CENTERS, 12" CHUCK, 4" BAR CAPACITY, BOX WAYS, LIVE TOLING, TAILSTOCK, STEADY REST AND 3 LIVE TOOL HOLDERS.

THIS 2011 DOOSAN PUMA 400B CNC LATHE FEATURES A FANUC 21iTB CONTROL, 21" CHUCK, 5.2" BORE AND A 2000 RPM SPINDLE.

THIS DOOSAN PUMA 400LC CNC LATHE COMES WITH A 21" CHUCK, 6.5" BAR WORK, 80" CENTERS, FANUC 21i-TB CONTROL, STEADY REST AND TAILSTOCK.

THIS DOOSAN PUMA 4100LB CNC LATHE INCLUDES A 18" SAMCHULLY CHUCK WITH 4.6" BAR CAPACITY, FANUC CONTROL AND SMW STEADY REST.

THIS DOOSAN PUMA 480 HAS A 24" CHUCK WITH 6.5' BAR CAP, FANUC 32i CONTROL WITH 1500 RPM SPINDLE.

THIS 2012 DOOSAN PUMA 480L CNC LATHE HAS 80" CENTERS WITH 24" CHUCK AND 6.5" BAR CAPACITY AND STEADY REST.

THIS BIG DOOSAN PUMA 480LM CNC LATHE WITH FANUC CONTROL HAS 80" CENTERS, TAILSTOCK, 24" HYDRAULIC CHUCK, STEADY REST AND A 6.62" BAR CAPACITY.

THIS PUMA 480XL HAS A FANUC 32i-A SERIES CNC CONTROL, 120" CENTERS, 24" SAMCHULLY CHUCK WITH A 7.1" BORE & 6.5" BAR CAP, SMW HYDRAULIC STEADY AND LOW HOURS.

THIS 2015 DOOSAN PUMA 480XL CNC TURNING CENTER WITH COOLANT THRU, 21" 3-JAW CHUCK (NEW IN BOX), 32" 4-JAW CHUCK, SAMCHULLY STEADY REST AND FANUC 32iA CONTROL.

DOOSAN PUMA 5100C LARGE SWING 10.8 BIG BORE FRONT AND BACK CHUCKS 80" CENTERS

HERE'S A 2013 DOOSAN PUMA 600LM CNC TURNING AND MILLING CENTER WITH A FANUC 31iT CONTROL, STEADY REST, 21" CHUCK AND 5.98" BORE.

THIS 2013 DOOSAN PUMA 700L CNC LATHE FEATURES A FANUC 32i CONTROL, TAILSTOCK AND 21" CHUCK WITH 7" BORE AND SCHUNK STEADY REST

THIS DOOSAN PUMA 700LM CNC TURNING AND MILLING WITH HYDRAULIC STEADY REST FEATURES A FANUC 21iTB CONTROL WITH A 32" 3-JAW HYDRAULIC CHUCK WITH A 7" BORE AND TAILSTOCK.

THIS 2013 DOOSAN MX 1600ST HAS (2) 6" CHUCKS , FANUC 31i-B5 CONTROL, 40 POSITION ATC AND 16 POSITION LOWER TURRET, LNS BARFEEDER, ALL TOOLHOLDERS FOR 16 STATION BMT-45 TURRET INCLUDING 3 LIVE TOOLS.

THIS 2020 DOOSAN MX 1600ST HAS (2) ROYAL QG-65 COLLET CHUCKS AND INSTALLATION TOOLS, A TURBO CHIP CONVEYOR, 16 POSITION LOWER TURRET AND A GREAT ASSORTMENT OF TOOLS. **ONLY 250 CUT HOURS!**

THIS DOOSAN PUMA MX-1600ST MULTI AXIS CNC LATHE, FANUC 31iB CONTROL, C-AXIS, B-AXIS, BAR FEEDER, PARTS CATCHER, HIGH PRESSURE COOLANT AND 6" CHUCK AND COLLET CHUCK ON SUB.

HERE'S A DOOSAN MX 2100ST MULTI AXIS CNC LATHE WITH FANUC 31i CONTROL, FULL CONTOURING C-AXIS, B-AXIS, EXTENDED Y-AXIS AND SPEEDY 1417 IPM RAPIDS.