MAZAK INTEGREX e650II-H CNC MULTI TASKING TURNING CENTER
CNC LATHES MULTI AXIS
.JPG)
.JPG)
.JPG)
.JPG)
.JPG)
.JPG)
.JPG)
.JPG)
THIS INTEGREX e-650H HAS 240" CENTERS, MATRIX 5 AXIS CONTROL, LONG BORING BAR STOCKER, COOLING THRU MILL HEAD, RENISHAW PROBE, 2 HDRAULIC STEADY REST AND A MANUAL STEADY REST ALONG WITH A 15" & 24" THRU HOLE CHUCKS.
| Maximum Swing | 36.2" |
| Max Turning Diameter | 36.2" |
| Main Spindle Bore/Max Bar Capacity | 6.69"/ 6.69" |
| Tail Stock/Sub Spindle | Tail Stock |
| Maximum Swing Over Cross Slide | 36.2" |
| Maximum Cutting Length | 240" |
| X-Axis Travel (X1, X2, X3) | 40.35 |
| Z-Axis Travel (Z1, Z2, Z3) | 252.87 |
| Y-Axis Travel (Y1, Y2, Y3) | 25.6 |
| Main Spindle Chuck Size | 24" |
| Main Spindle Chuck Type | Air |
| Main Spindle Bore Diameter | 6.69" |
| Main Spindle Speed | 1,600 RPM |
| Main Spindle Horsepower (CONT. /30 MINS) | 60/ 50 |
| Main & Sub Spindle Synchronization | Yes |
| ATC Magazine Capacity | 80 |
| B-Axis Travel | -30 - +210 |
| B-Axis Head Indexing | 0.0001 deg |
| B Axis Rotary Tool Spindle Speed | 10000 rpm |
| B-Axis Rotary Tool Spindle Horsepower | 50 hp |
| Long Boring Bar Stocker | YES |
| Steady Rest | Yes |
| Chip Conveyor | Yes |
| Milling Spindle Synchronous Tapping | Yes |
| Tool Eye Automatic Front Spindle | Yes |
| Coolant Thru Milling Head | Yes |
| High Pressure Coolant System (PSI) | 213 |
| Multi Tap Transformer | Yes |
| Control | CNC (MAZATROL MATRIX 5-AXIS) |
| Weight | 90,200 LBS |
SPECIFICATIONS:
MAXIMUM SWING OVER BED 36.2"
MAXIMUM SWING OVER CARRIAGE 36.2"
MAXIMUM MACHINING DIAMETER 36.2"
MAXIMUM CUTTING LENGTH 240"
MAIN MOTOR DRIVE 60/50 HP AC
SPINDLE HOLE 6.69"
SPINDLE NOSE A2-11"
SPINDLE SPEEDS 1600 RPM
MAIN SPINDLE TORQUE 3,319 FT/LBS.
SPINDLE PROGRAMMING INCREMENTS (C-AXIS) 360,000 N/C CONTOURING
X- AXIS TRAVEL 40.35"
Z- AXIS TRAVEL 252.87"
Y- AXIS TRAVEL 25.6"
B- AXIS POSITIONING -30 - +210
RAPID TRAVERSE RATE(X , Y ,Z) 1575,1575,1575
MAXIMUM CUTTING FEEDRATE 1575 IPM
TOOL MAGAZINE CAPACITY 80 ATC
ROTARY TOOL SPINDLE SPEED 10,000 RPM (HIGH TORQUE)
ROTARY TOOL MOTOR 50 HP AC
TAILSTOCK:
SPINDLE CENTER MT # 6
QUILL DIAMETER 7.09"
QUILL TRAVEL 6.3"
QUILL THRUST 6914 LBS.
TAILSTOCK BODY TRAVEL 198.08"
MACHINE WEIGHT 90,200 LBS.
MAZATROL MATRIX 5-AXIS CONVERSATIONAL CONTROL
EIA / ISO INPUT FUNCTION
ADD. EIA / ISO FUNCTIONS (REQ. EIA / ISO)
LONG BORING BAR STOCKER
INVERSE TIME FEED
B-AXIS 5 DEGREE COUPLING CLAMP
B-AXIS CONTOURING
.0001 DEGREE B-AXIS INDEXING
Y-AXIS CONTROL
X, Y, Z, PITCH ERROR COMP INPUT
COOLANT THRU MILLING HEAD
AURO TOOL LENGTH MEARUING SYSTEM
OPERATOR DOOR INTERLOCK WITH LOCK SWITCH
E-TOWER MONITOR
USER MACRO 600 PAIRS
MAZAK TAPPING BORING / TORNADO (EIA/ISO)
ADD.
B) MAZAK 2D SOFTWARE (SHAPE COMPENSATION)
ADD. WORKPIECE COORDINATE SYSYTEM 300 PAIRS
THREAD CUTTING FUNCTION
CARDBUS I/F (2-SLOT)
LAN PORT
USB I/F
IC MEMORY CARD
15"& 24" THRU HOLE CHUCK
MILL SPINDLE SYNC. TAPPING
INCH /METRIC CONVERSION
C-AXIS 0.0001 DEGREE INCREMENT
CHIP CONVEYOR 240"
MONITORING SYSTEM B RENISHAW MP10 (H/V ONLY)
MANUAL DETACHABLE MPG
EIA IST SPINDLE & MILL SPINDLE SIMUL ROTATION
COOLANT TEMPERATURE CONTROL SYSTEM
HIGH PRESSURE COOLANT 213 PSI
AUTO POWER ON / OFF WARM UP
(2)FULLY PROGRAMMABLE OPEN CLOSE SMW AUTOBLOK STEADY REST
(1)MANUAL STEADY REST
TRANFORMER
ALL AVAILABLE TOOL HOLDERS
ALL AVAILABLE MANUALS
