MAZAK INTEGREX 200IV ST/ 60
CNC LATHES MULTI AXIS
THIS INTEGREX 200ST HAS A MATRIX CONTROL, 40 STATION ATC & 9 POSITION LOWER TURRET, 60" CENTERS, 2 --8" CHUCKS, PARTS CATCHER, 213 PSI COOLANT THRU AND CAPTO TOOLING.
| Maximum Swing | 26.5" |
| Max Turning Diameter | 26" |
| Main Spindle Bore/Max Bar Capacity | 2.99/ 2.5 |
| Tail Stock/Sub Spindle | Sub Spindle |
| Maximum Swing Over Cross Slide | 26.5" |
| Maximum Cutting Length | 61" |
| X-Axis Travel (X1, X2, X3) | 22.8/ 5.91 |
| Z-Axis Travel (Z1, Z2, Z3) | 60.82/ 58.66 |
| Y-Axis Travel (Y1, Y2, Y3) | +/- 3.15" |
| C-Axis Indexing (1, 2) | .0001/ .0001 |
| W-Axis Travel Sub Spindle | 60.24 in |
| Main Spindle Chuck Size | 8" |
| Main Spindle Chuck Type | Hydraulic |
| Main Spindle Bore Diameter | 2.99" |
| Main Spindle Maximum Bar Work | 2.5" |
| Main Spindle Speed | 5,000 RPM |
| Main Spindle Horsepower (CONT. /30 MINS) | 30/ 25 |
| Sub Spindle/2nd Spindle Chuck Size | 8 |
| Sub Spindle/2nd Spindle Bore Size | 2.99 |
| Sub Spindle/2nd Spindle Chuck Type | Hydraulic |
| Sub Spindle/2nd Spindle Speed | 5,000 RPM |
| Sub Spindle/2nd Spindle Horsepower (CONT. /30 MINS) | 25/20 |
| ATC Magazine Capacity | 40 |
| Number of Turrets | 1 |
| Turret Tool Positions 1, 2 | 9 |
| Turret Rotary Tool Spindle Speed 1, 2 | 6000 |
| Turret Rotary Tool Horse Power 1, 2 | 5 |
| B-Axis Travel | 225 DEG |
| B-Axis Head Indexing | 5 deg |
| B Axis Rotary Tool Spindle Speed | 12000 rpm |
| B-Axis Rotary Tool Spindle Horsepower | 25 hp |
| Parts Catcher | Yes |
| Chip Conveyor | Yes |
| Milling Spindle Synchronous Tapping | Yes |
| High Pressure Coolant System (PSI) | 213 |
| Control | CNC (MAZATROL MATRIX) |
SPECIFICATIONS:
MAX. SWING 26.5"
MAX MACHINING DIA. UPPER / LOWER TRT 26" / 10.6"
MAX. SWING OVER LOWER TURRET 16.5"
MAXIMUM CUTTING LENGTH 61"
SPINDLE BORE 2.99"
SPINDLE NOSE A2-8
MAX BAR CAPACITY 2.50"
SPINDLE SPEEDS 5000 RPM
AXIS TRAVEL C - AXIS .0001 N/C CONTOUR
X - AXIS 22.8"
Z - AXIS 60.82"
X2 - AXIS (LOWER TURRET) 5.91"
Z2 - AXIS (LOWER TURRET) 58.66"
Y - AXIS +/- 3.15"
B - AXIS 225 DEGREES
5 DEGREE CLAMPING
W - AXIS (2nd SPINDLE) 60.24"
SECOND SPINDLE RPM 5000 RPM
SPINDLE NOSE A2-6
SPINDLE BORE (SECOND SPINDLE) 3"
SECOND SPINDLE MIN. INDEXING .0001 N/C CONTOUR
SECOND SPINDLE TRAVEL 62.3"
RAPID TRAVERSE RATES C - AXIS 555 RPM
X - AXIS 1496 IPM
Z - AXIS 1496 IPM
Y - AXIS 1023 IPM
B - AXIS 555 RPM
W - AXIS 1181 IPM
MIN. SPINDLE INDEXING (MAIN SPINDLE) .001 DEGREE
TOOL MAGAZINE CAPACITY 40 ATC CAPTO
LOWER TURRET POSITIONS 9 TOOL DRUM
LOWER TURRET MILLING OPTION (SPEEDS) 6,000 RPM
LOWER TURRET MILLING MOTOR HP 5 HP AC
MAX. TOOL DIA. ADJ. 3.54"/4.92"
MAX. TOOL LENGTH 11.81"
ROTARY TOOLS SPINDLE NOSE KM STYLE
ROTARY TOOL SPINDLE SPEED 12,000 RPM
ROTARY TOOL MOTOR 25 HP
MAXIMUM TOOL WEIGHT 22 LBS.
Z - AXIS THRUST 3124 FT/LBS.
MAIN MOTOR / SECOND SPINDLE 30 HP/AC 25 HP
MAZATROL MATRIX CNC CONVERSATIONAL CONTROL
15KG/213PSI THRU/FLOOD COOLANT
(UPPER TURRET) 71 PSI LOWER
2ND SPINDLE C-AXIS 0.0001 DEGREE INCR.
MILL TURNING (MAZATROL)
HOBBING FUNCTION W/O TOOLING
8" THRU-HOLE CHUCK BB08
(1ST SPD.) THRU-HOLE CYL.S1875
8" THRU-HOLE CHUCK B-208A615
(2ND SPNDL) NON-THRU CYL.Y1225
40 CAPTO-TOOL MAGAZINE
(Factory Install Only)
OVERLOAD DETECTION SYSTEM
CONSEP CHIP-CONVEYOR SIDE 60" 1500U
EIA/ISO FUNCTION
AUTOMATIC PARTS CATCHER W/EJEC
(2.5"DIAMETER X 4.7"L X 5.5LB)
HIGH/LOW CHUCK PRESS.SYS
(FIRST SPINDLE)
PREPARATION FOR 750K MIST
COLLECTOR W/POWER & OD123 DUCT
UP-TURRET AIR BLAST
(FLOOD-CLNT. NOZZLE)
AUTO PECKING W/LOAD
DETECTION(UP-TURRET)
ADDITIONAL M CODE ONE SET (2
M-CODES)
C1C2 SYNCHRONOUS FUNCTION
F)EIA/ISO FUNCTION
SIMULTANEOUS 5 AXES
F)TOOL TIP POINT CONTROL
/SIMULT. 5 AXES
F)TOOL RADIUS COMPENSATION /
5-AXIS
TAIL CENTER ATTACHMENT (LOWER
TURRET)
PREPARATION FOR CAPTO MULTI &
FLASH SYSTEM
