SPECIFICATIONS: TABLE SIZE                            49.2"X 118.1" X-AXIS TRAVELS                        125.98" Y-AXIS TRAVELS                        55.12" Z-AXIS TRAVELS                        23" DISTANCE FROM SPINDLE           NOSE-TO-TABLE TOP           7.87" - 30.91" DISTANCE BETWEEN COLUMNS              58.27" MAXIMUM TABLE LOAD CAPACITY           11,000 LBS MAXIMUM WORKPIECE SIZE (L/W/H)        118.1"/58.27"/25.2" SPINDLE TAPER                         50# SPINDLE HORSEPOWER(CONT/30 MIN)       40 HP SPINDLE SPEED                         10,000 RPM NUMBER OF SPEEDS                      1 RPM INCREMENTS NUMBER OF RANGES                      1 TOOL CLAMPING FORCE                   3,960 LBS. SPINDLE BEARINGS FRONT (TYPE)         ANG. CONTACT BALL SPINDLE BEARINGS REAR (TYPE)          SINGLE ROW SPINDLE COOLING SYSTEM                CHILLER UNIT ATC MAGAZINE CAPACITY                 60 CHIP-TO-CHIP TOOL CHANGE TIME         9.8 SECONDS (APPROX) METHOD OF TOOL SELECTION              RANDOM MAX.TOOL DIA.W/ALL POCKETS FULL       4.92" DIA. MAX.TOOL DIA.W/ADJACENT               POCKETS EMPTY           8.27" DIA. MAX.TOOL LENGTH            (SHANK+RETENTION STUD)     19.96" MAXIMUM TOOL WEIGHT                   44 LBS TYPE OF SERVO DRIVES                  DIGITAL AC RAPID TRAVERSE RATE (X&Y AXIS)        945 /1260 IPM RAPID TRAVERSE RATE (Z-AXIS)          709 IPM MAX. PROGRAMMABLE FEEDRATE(X&Y AXIS)  709 IPM MAX. PROGRAMMABLE FEEDRATE(Z-AXIS)    709 IPM FLOOR SPACE (W X L) (WITH 30 TOOLS)   150.67"X 318.9" MACHINE HEIGHT (WITH STANDARD COLUMN) 138.8" TOTAL POWER REQUIRED (MACHINE ONLY)   59 KVA      NOTE: ACTUAL MACHINE MAIN TRANSFORMER            KVA RATING WILL BE GREATER MACHINE WEIGHT                        59,400 LBS.