Type:
CNC LATHES MULTI AXIS
Manufacturer:
MAZAK
Model:
MAZAK INTEGREX i-200ST WITH GL-100F GANTRY
Condition:
Used - Excellent
Year:
2017
Stock #:
210108
Status:
For Sale
THIS 2017 INTEGREX i-200ST HAS A GL-100F GANTRY, SMOOTH X CONTROL, 110 POSITION ATC AND 9 POSITION LOWER TURRET, 1000 PSI COOLANT THRU SPINDLE, AND 60" CENTERS. VERY LOW HOURS, EXCELLENT CONDITION
| Maximum Swing | 25.9" |
| Max Turning Diameter | 25.9" |
| Main Spindle Bore/Max Bar Capacity | 2.99/ 2.5 |
| Tail Stock/Sub Spindle | Sub Spindle |
| Maximum Swing Over Cross Slide | 25.9" |
| Maximum Cutting Length | 59.8" |
| X-Axis Travel (X1, X2, X3) | 24.21/ 9.06 |
| Z-Axis Travel (Z1, Z2, Z3) | 62.4/ 54.65 |
| Y-Axis Travel (Y1, Y2, Y3) | 10.24 |
| C-Axis Indexing (1, 2) | 0.0001 |
| W-Axis Travel Sub Spindle | 60.6 in |
| Main Spindle Chuck Size | 8" |
| Main Spindle Chuck Type | Hydraulic |
| Main Spindle Bore Diameter | 2.99" |
| Main Spindle Maximum Bar Work | 2.5" |
| Main Spindle Speed | 5,000 RPM |
| Main Spindle Horsepower (CONT. /30 MINS) | 30/20 |
| Sub Spindle/2nd Spindle Chuck Size | 8 |
| Sub Spindle/2nd Spindle Bore Size | 2.99 |
| Sub Spindle/2nd Spindle Chuck Type | Hydraulic |
| Sub Spindle/2nd Spindle Speed | 5,000 RPM |
| Sub Spindle/2nd Spindle Horsepower (CONT. /30 MINS) | 25/20 |
| Main & Sub Spindle Synchronization | Yes |
| ATC Magazine Capacity | 110 HSK |
| Number of Turrets | 1 |
| Turret Tool Positions 1, 2 | 9 |
| Turret Type | DRUM |
| B-Axis Head Indexing | 0.0001 deg |
| B-Axis Milling Spindle Horse Power | 3020 |
| B Axis Rotary Tool Spindle Speed | 12000 rpm |
| Chip Conveyor | Yes |
| Milling Spindle Synchronous Tapping | Yes |
| Tool Eye Automatic Front Spindle | No |
| Tool Eye Automatic Second Spindle | No |
| Tool Eye Measurement Upper Turret | Yes |
| Tool Eye Measurement Lower Turret | Yes |
| Coolant Thru Milling Head | Yes |
| High Pressure Coolant System (PSI) | 213 |
| Gantry System | Yes |
| Multi Tap Transformer | Yes |
| Control | CNC (MAZATROL SMOOTH X) |
| Dimensions | 193.3" X 110.2" X 107 |
| Weight | 35,596 lbs |
213 PSI THRU COOLANT 2ND SPINDLE C-AXIS .0001 DEGREE 110 HSK TOOL MAGAZINE SIGNAL TOWER 3 COLORS MAYFRAN CONSEP CHIP CONVEYOR RENISHAW RMP-600 WORK MEASURING SYSTEM WITH PROBE AUTO PECKING DRILL CYCLE WITH LOAD DETECTION HOBBING FUNCTION TOOL RADIUS COMPENSATION 5-AXIS MILLING PACKAGE SIMULTANEOUS 5-AXIS FOR 2ND SPINDLE MAXIMUM PROGRAM SIZE 32MB SMOOTH SET AND INSPECTION SOFTWARE GL150F PITCH FEED ROBOT WITH D3 HANDS INSTALLED NEW APRIL 2017 TOTAL CUT HOURS AS OF SEPT 2022 TURRET 1 = 1,672 HOURS TURRET 2 = 617 HOURS REPLACEMENT COST $746,000
.jpg)
