DOOSAN MX 2100ST MULTI AXIS
CNC LATHES MULTI AXIS
HERE'S A DOOSAN MX 2100ST MULTI AXIS CNC LATHE WITH FANUC 31i CONTROL, FULL CONTOURING C-AXIS, B-AXIS, EXTENDED Y-AXIS AND SPEEDY 1417 IPM RAPIDS.
| Maximum Swing | 29.5" |
| Max Turning Diameter | 21.25" |
| Main Spindle Bore/Max Bar Capacity | 2.99/ 2.68 |
| Tail Stock/Sub Spindle | Sub Spindle |
| Maximum Swing Over Cross Slide | 23.6" |
| Distance Between Spindles | 52.5" |
| X-Axis Travel (X1, X2, X3) | 22.24/ 7.36 |
| Z-Axis Travel (Z1, Z2, Z3) | 41.3/ 41.3 |
| Y-Axis Travel (Y1, Y2, Y3) | 6.7” (+/- 3.35) |
| C-Axis Indexing (1, 2) | .001 |
| Main Spindle Chuck Size | 8" |
| Main Spindle Chuck Type | Hydraulic |
| Main Spindle Bore Diameter | 2.99" |
| Main Spindle Maximum Bar Work | 2.625" |
| Main Spindle Speed | 5,000 RPM |
| Main Spindle Horsepower (CONT. /30 MINS) | 30 |
| Sub Spindle/2nd Spindle Bore Size | 2.56 |
| Sub Spindle/2nd Spindle Speed | 12,000 RPM |
| Sub Spindle/2nd Spindle Horsepower (CONT. /30 MINS) | 30/ 25 |
| ATC Magazine Capacity | 40 |
| Number of Turrets | 1 |
| Turret Tool Positions 1, 2 | 12 |
| B-Axis Travel | 240 (+/- 120) DEG. |
| B-Axis Head Indexing | 5 deg |
| B-Axis Milling Spindle Speed | 12000 rpm |
| B-Axis Milling Spindle Horse Power | 25 |
| B Axis Rotary Tool Spindle Speed | 5000 rpm |
| B-Axis Rotary Tool Spindle Horsepower | 7.5 hp |
| Chip Conveyor | Yes |
| Coolant Thru Milling Head | Yes |
| Control | CNC (FANUC 31i) |
| Weight | 26,450 LBS |
SPECIFICATIONS:
SWING OVER BED 29.5"
SWING OVER CARRIAGE 23.6"
MAXIMUM BAR CAPACITY (2.55 RIGHT SPINDLE W/ WORK EJECTOR) 2.625
MAXIMUM TURNING DIAMETER, MAIN SPINDLE 21.25"
MAX. PERMISSIBLE WEIGHT (INCLUDING CHUCK) CHUCK WORK/SHAFT WORK 264 / 1012 LBS.
DISTANCE BETWEEN MAIN & SUBSPINDLE NOSE 52.5
LEFT AND RIGHT SPINDLE:
CHUCK SIZE 8"
SPINDLE SPEED 5,000 RPM
SPINDLE NOSE ASA-A2-6
LEFT SPINDLE DRAWTUBE I.D. 2.68
RIGHT SPINDLE DRAWTUBE I.D. 2.559
SPINDLE BORE DIAMETER 2.99"
AC HIGH TORQUE SPINDLE MOTOR (30 MIN. RATING) 30 HP
MAXIMUM SPINDLE TORQUE (15% ED) 234 FT-LBS
LEFT (MAIN) AND RIGHT SPINDLE C-AXIS:
MINIMUM PROGRAMMABLE ANGLE (DEGREES) .001
RAPID TRAVERSE RATE (RPM) 400
C-AXIS REPEATABILITY +/- .006 DEG.
C-AXIS POSITIONING ACCURACY .0167 DEG.
MILLING SPINDLE
SPINDLE SPEED 12,000 RPM
MOTOR POWER (10 MIN. RATING) 25 HP
MAXIMUM SPINDLE TORQUE (15% ED) 60 FT-LBS
TOOL INDEX (2,3 OR 4 INSERT MULTI-TOOLS) 30 DEG.
B-AXIS (TILT) COUPLING INCREMENT 5 DEG.
B-AXIS TRAVEL 240 (+/- 120) DEG.
B-AXIS MINIMUM INCREMENT 0.001 DEG
B-AXIS POSITIONING ACCURACY 0.006 DEG.
B-AXIS REPEATABILITY 0.002 DEG.
BED, SADDLE, & CROSS SLIDE:
X1 (UPPER) AXIS TRAVEL 22.24
X2 (LOWER) AXIS TRAVEL 7.36
Z1 (UPPER) AND Z2 (LOWER) AXIS TRAVEL 41.3
ANGLE OF SLANT BED 60 DEGREES
X1 AXIS RAPID TRAVERSE RATE 1,417 IPM
Z1 AXIS RAPID TRAVERSE RATE 1,417 IPM
X / Z AXIS BALL SCREW DIAMETER 1.42" / 1.57
CONTINUOUS AXIS FEED THRUST (X1 / X2) 1,965 / 1,288 LBS
CONTINUOUS AXIS FEED THRUST (Z1 / Z2) 1,965 / 1,075 LBS
MAXIMUM AXIS FEED THRUST (X1 / X2) 3,145 / 2,062 LBS
MAXIMUM AXIS FEED THRUST (Z1 / Z2) 3,145 / 1,720 LBS
X AXIS REPEATABILITY + 0.00007"
Z AXIS REPEATABILITY + 0.00011"
Y-AXIS:
Y-AXIS TRAVEL 6.7 (+/- 3.35)
Y-AXIS RAPID TRAVERSE RATE 1,024 IPM
Y-AXIS REPEATABILITY .00011
ATC:
TOOL HOLDER TYPE CAPTO-C6
TOOL STORAGE CAPACITY CAM 40 (OPT. 80)
MAX. TOOL DIAMETER 3.54
MAX. TOOL DIAMETER W/O ADJACENT TOOLS 4.72
MAX. TOOL LENGTH 11.8
MAX. TOOL WEIGHT 17.6 LBS.
TOOL SELECTION METHOD FIXED
TOOL CHANGE TIME (TOOL TO TOOL) 1.8
TURRET LOWER:
NUMBER OF TOOLS 12
TOOL HOLDER TYPE BMT 55P
TURNING TOOL SHANK SIZE 1.0"
BORING BAR DIAMETER 1.5"
TURRET INDEX TIME (NEXT STATION SWIVEL TIME) 0.2 SEC.
TOOL SELECTION BI-DIRECTIONAL
TURRET INDEX REPEATABILITY + .0005 DEGREE
ROTATING TOOLS LOWER TURRET:
ROTATING TOOL RPM 5,000 RPM
ROTATING TOOL SPINDLE MOTOR (25% ED) 7.5 HP
ROTATING TOOL TORQUE (25% ED) 34.7 FT-LBS.
ROTATING TOOL COLLET TYPE ER-25
MILLING COLLET CAPACITY .079 TO .625"
COOLANT SYSTEM:
MILLING SPINDLE COOLANT PUMP PRESSURE 145 PSI
MILLING SPINDLE COOLANT PUMP MOTOR 3.0 HP
LOWER TURRET COOLANT PUMP PRESSURE 65 PSI
LOWER TURRET COOLANT PUMP MOTOR 1.2 HP
COOLANT TANK CAPACITY 129 GALLONS
GENERAL:
FLOOR SPACE (LENGTH X WIDTH) 191 X 97.5
NET WEIGHT 26,450 LBS.
MACHINE HEIGHT 111
HEIGHT FROM FLOOR TO SPINDLE CENTER LINE 48.8
VOLTAGE REQUIRED 205 - 235 VOLT / 3 PHASE
POWER REQUIREMENT 87 KVA
FANUC 31i
HIGH SPEED 5,000 RPM SPINDLES
POWERFUL 30 HP HIGH-TORQUE INTEGRAL SPINDLE MOTORS
REFRIGERATED TEMPERATURE CONTROL SYSTEM FOR BOTH SPINDLES
LARGE 2-5/8 BAR CAPACITY
MILLING, DRILLING, AND TAPPING CAPABILITIES
SERVO DRIVEN 40 STATION ATC WITH 1.8 SEC TOOL TO TOOL TIME
FAST 12,000 RPM MILLING SPINDLE
25 HP MILLING SPINDLE MOTOR
Y-AXIS WITH 6.7 STROKE
X1 AXIS GLASS SCALES
BT-AXIS (TILTING) 240 DEGREES
ROLLER GEAR CAM (RGC) TYPE B-AXIS GEAR TRAIN
12 STATION LOWER TURRET WITH ROTARY TOOL CAPABILITY
BASE MOUNTED TOOLING (BMT) SYSTEM ON LOWER TURRET
FULL CONTOURING C-AXIS
RIGID TAPPING ON LEFT AND RIGHT SPINDLES, MILLING SPINDLE AND ROTARY TOOLS
TOOL MONITORING SYSTEM - WEAR AND BREAKAGE DETECTION
PRETENSIONED X AND Z AXIS BALL SCREWS
FAST 1,417 IPM RAPID TRAVERSE
ELECTRIC TORQUE LIMITER CRASH PROTECTION
AUTOMATIC TOOL SETTER
AUTOMATED PART UNLOADING SYSTEM
SEPARATE COOLANT TANK
LARGE 21.25 MAXIMUM TURNING DIAMETER
145 PSI COOLANT PUMP FOR MILLING HEAD
WAY LUBE SEPARATION SYSTEM
RIGHT SPINDLE BODY POSITIONING BY BALL SCREW & SERVO MOTOR
RIGHT SPINDLE CAN BE SYNCHRONIZED WITH LEFT SPINDLE
