DOOSAN MX 2100ST MULTI AXIS

SPECIFICATIONS:
SWING OVER BED                                                   29.5"
SWING OVER CARRIAGE                                              23.6"
MAXIMUM BAR CAPACITY (2.55” RIGHT SPINDLE W/ WORK EJECTOR)       2.625”
MAXIMUM TURNING DIAMETER, MAIN SPINDLE                           21.25"
MAX. PERMISSIBLE WEIGHT (INCLUDING CHUCK) CHUCK WORK/SHAFT WORK  264 / 1012 LBS.
DISTANCE BETWEEN MAIN & SUBSPINDLE NOSE                          52.5”
LEFT AND RIGHT SPINDLE:   
CHUCK SIZE                                                       8"
SPINDLE SPEED                                                    5,000 RPM 
SPINDLE NOSE                                                     ASA-A2-6
LEFT SPINDLE DRAWTUBE I.D.                                       2.68”
RIGHT SPINDLE DRAWTUBE I.D.                                      2.559”
SPINDLE BORE DIAMETER                                            2.99" 
AC HIGH TORQUE SPINDLE MOTOR (30 MIN. RATING)                    30 HP  
MAXIMUM SPINDLE TORQUE (15% ED)                                  234 FT-LBS 
LEFT (MAIN) AND RIGHT SPINDLE C-AXIS:
MINIMUM PROGRAMMABLE ANGLE (DEGREES)                             .001
RAPID TRAVERSE RATE (RPM)                                        400
C-AXIS REPEATABILITY                                             +/- .006 DEG.
C-AXIS POSITIONING ACCURACY                                      .0167 DEG.
MILLING SPINDLE
SPINDLE SPEED                                                    12,000 RPM
MOTOR POWER (10 MIN. RATING)                                     25 HP
MAXIMUM SPINDLE TORQUE (15% ED)                                  60 FT-LBS
TOOL INDEX (2,3 OR 4 INSERT MULTI-TOOLS)                         30 DEG.
B-AXIS (TILT) COUPLING INCREMENT                                 5 DEG.
B-AXIS TRAVEL                                                  240 (+/- 120) DEG.
B-AXIS MINIMUM INCREMENT                                         0.001 DEG
B-AXIS POSITIONING ACCURACY                                      0.006 DEG.
B-AXIS REPEATABILITY                                             0.002 DEG.
BED, SADDLE, & CROSS SLIDE:
X1 (UPPER) AXIS TRAVEL                                           22.24”
X2 (LOWER) AXIS TRAVEL                                           7.36”
Z1 (UPPER) AND Z2 (LOWER) AXIS TRAVEL                            41.3”
ANGLE OF SLANT BED                                               60 DEGREES
X1 AXIS RAPID TRAVERSE RATE                                      1,417 IPM 
Z1 AXIS RAPID TRAVERSE RATE                                      1,417 IPM
X / Z AXIS BALL SCREW DIAMETER                                   1.42" / 1.57”
CONTINUOUS AXIS FEED THRUST (X1 / X2)                          1,965 / 1,288 LBS
CONTINUOUS AXIS FEED THRUST (Z1 / Z2)                          1,965 / 1,075 LBS
MAXIMUM AXIS FEED THRUST (X1 / X2)                             3,145 / 2,062 LBS
MAXIMUM AXIS FEED THRUST (Z1 / Z2)                             3,145 / 1,720 LBS
X AXIS REPEATABILITY                                             + 0.00007"
Z AXIS REPEATABILITY                                             + 0.00011"
Y-AXIS: 
Y-AXIS TRAVEL                                                    6.7” (+/- 3.35)
Y-AXIS RAPID TRAVERSE RATE                                       1,024 IPM
Y-AXIS REPEATABILITY                                             .00011” 
ATC:
TOOL HOLDER TYPE                                                 CAPTO-C6
TOOL STORAGE CAPACITY                                            CAM 40 (OPT. 80) 
MAX. TOOL DIAMETER                                               3.54”
MAX. TOOL DIAMETER W/O ADJACENT TOOLS                            4.72”
MAX. TOOL LENGTH                                                 11.8”
MAX. TOOL WEIGHT                                                 17.6 LBS.
TOOL SELECTION METHOD                                            FIXED
TOOL CHANGE TIME (TOOL TO TOOL)                                  1.8
TURRET – LOWER: 
NUMBER OF TOOLS                                                  12
TOOL HOLDER TYPE                                                 BMT 55P
TURNING TOOL SHANK SIZE                                          1.0"
BORING BAR DIAMETER                                              1.5"
TURRET INDEX TIME (NEXT STATION SWIVEL TIME)                     0.2 SEC.
TOOL SELECTION                                                   BI-DIRECTIONAL
TURRET INDEX REPEATABILITY                                       + .0005 DEGREE
ROTATING TOOLS LOWER TURRET:
ROTATING TOOL RPM                                                5,000 RPM
ROTATING TOOL SPINDLE MOTOR (25% ED)                             7.5 HP
ROTATING TOOL TORQUE (25% ED)                                    34.7 FT-LBS.
ROTATING TOOL COLLET TYPE                                        ER-25
MILLING COLLET CAPACITY                                          .079” TO .625"
COOLANT SYSTEM: 
MILLING SPINDLE COOLANT PUMP PRESSURE                            145 PSI
MILLING SPINDLE COOLANT PUMP MOTOR                               3.0 HP
LOWER TURRET COOLANT PUMP PRESSURE                               65 PSI
LOWER TURRET COOLANT PUMP MOTOR                                  1.2 HP
COOLANT TANK CAPACITY                                            129 GALLONS
GENERAL:     
FLOOR SPACE (LENGTH X WIDTH)                                     191” X 97.5” 
NET WEIGHT                                                       26,450 LBS. 
MACHINE HEIGHT                                                   111”
HEIGHT FROM FLOOR TO SPINDLE CENTER LINE                         48.8”
VOLTAGE REQUIRED                                         205 - 235 VOLT / 3 PHASE
POWER REQUIREMENT                                                87 KVA