HMG HAS-423EAY DOUBLE COLUMN MACHING CENTER LIKE NEW

TABLE
Working Surface 157.48” x 86.61”
T slots (Width x No. x Pitch) (in) 1.1” x15x 9.84”
Max. Table Load (lbs) 26,455.5
AXES MOVEMENT
X-Axis, (in) 157.48 ”
Y-Axis, (in) 122.05”
Z-Axis, (in) 39.37”
Distance from Spindle end to table surface (in) 13.78"~53.15"
Distance from Spindle center to column (in) 17.72”
Width between column (in) 90.55”
ACCURACY
Positioning accuracy (mm) ±0.010
Repeatability accuracy (mm) ±0.003
AXIS DRIVE MOTOR
X-Axis Drive Motor Fanuc α40
Y-Axis Drive Motor Fanuc α30
Z-Axis Drive Motor Fanuc α60
FEED
Cutting Feed Rate (in/min) X/Y/Z 393.7”/472.44”/472.44”
Rapid Traverse (in/min) X/Y/Z 787.44”/708.66”/629.92”
SPINDLE
Spindle Nose Taper BBT 50 (customer to specify)
Spindle Speed: 6,000 RPM
Spindle Motor: 30 Min Rating 50 HP, GEAR
AUTOMATIC TOOL CHANGER
Tool Storage Capacity: 32/40/60/90 (A-type, vertical type)
Max. Tool Weight (lbs) 44.09
Max. Tool Size (Diameter x Length) (in) Ø4.92” x 15.75”
Tool Shank+ Tool Stud Bolt CAT-50
POWER REQUIREMENTS
Electric Power Consumption 220V
Compressed Air 60 KVA
92.5 PSI
FLOOR SPACE:
Dimensions (in) for Z_39.37” 511.81” x 267.72”
Machine Weight (lbs) for Z_39.37” 81,791
*Machine’s weight, dimensions & power consumption may vary depending upon factory-ordered options*