2012 HWACHEON CUTEX 160AMC

HWACHEON FANUC 0IT-D WITH ETHERNET, MANUAL GUIDE I, 6" DIAMETER HYDRAULIC THRU-HOLE POWER CHUCK WITH ONE SET OF SOFT JAWS, HYDRAULIC TAILSTOCK, 12-STATION TURRET WITH SERVO INDEX / NON-LIFT CURVIC COUPLING, COMPLETE COOLANT SYSTEM, COOLANT PRESSURE CAPABILITY UP TO 1,000 PSI, CHIP AND COOLANT SPLASH GUARDING SEPARATE FROM BED CASTING, HYDRAULIC UNIT, DOOR INTERLOCK, STANDARD WORK LIGHT, 2-COLOR SIGNAL LAMP (RED/GREEN), 45-DEGREE SLANT BED DESIGN WITH TORQUE TUBE DESIGN, ID/OD TOOLING IN ANY POSITION ON THE TURRET, FOOT SWITCH FOR HYDRAULIC CHUCK AND TAILSTOCK, ONE (1) SET OF ADJUSTING TOOLS, MANUAL: PROGRAMMING, OPERATING, TOOLING, MAINTENANCE, STANDARD TOOLING
$85,000.00
-1 2.5% DISCOUNT ($2,105.00)
1 PARTS CATCHER $3,380.00
1 TOOL PRESETTER $3,860.00
1 JORGENSEN CHIP CONVEYOR SIDE DISCHARGE $7,050.00
1 BARFEED INTERFACE $730.00
1 5 C COLLET NOSE $1,250.00
1 16 C COLLET NOSE $1,275.00
2 AXIAL TOOL HOLDER X AXIS $3,840.00
2 RADIAL TOOL HOLDER Z AXIS $7,680.00
1 14A4402 FACE HOLDER $520.00
1 14A4401 OD CUTTING TOOL $575.00
ID HOLDER ( BORING BAR) $1,300.00
1 AXIAL TOOL HOLDER ( FREE WITH MACHINE) $0.00
1 RADIAL TOOL HOLDER ( FREE WITH MACHINE) $0.00
TOTAL $114,355.00
CUT HOURS 2685

Equipment, descriptions, and specifications are intended only as a guide.
Item(s) are Sold "As Is, Where Is" As inspected, unless otherwise stated and conveyed in writing.
Please feel free to contact us for any service requests and requirements as we have service techs available.