2006 MATSUURA H-PLUS 630 PC2
Have one to sell?
ConditionUsed
1 available
CUT HOURS 3301 - 2006 Matsuura H-Plus 630 PC2, horizontal machining center. X/Y/Z travel: 41.33"/36.2"/38.97", CAT 50 spindle, 12,000 RPM, 240-tool capacity, dual pallets, high-pressure coolant, chip conveyor, and FANUC controls.
MATSUURA HORIZONTAL MACHINING CENTER $569,000.00
1 TURBO MICRO FINE CHIP CONVEYOR S/N 364390 $23,500.00
1 LASER BROKEN TOOL DETECTION / TOOL MEASUREMENT $11,570.00
1 DATA SERVER $5,100.00
1 MP700 RENISHAW IN PROCESS MEASUREMENT $13,050.00
1 CTS 800 PSI $8,900.00
1 MANUAL PULSE GENERATOR $1,500.00
1 CONTROL OPTIONS PACKAGE "D" ( FANUC) $8,800.00
1 DISCOUNT ($66,420.00)
1 PROBE SELECTION RELAY KIT $0.00
1 NO. OF REGISTERED PROGRAMS (1000 PCS) ( FANUC) $0.00
1 TOOL OFFSET NUMBER ADDITION (TOTAL 999) ( FANUC) $0.00
1 ADDITIVE WORK COORDINATE SYSTEM (300 SETS) ( FANUC) $0.00
1 9 PCS. OF OPTI BLOCK SKIP ADDIT'L WITHOUT HARD SWITCH ( FANUC) $0.00
1 PROGRAM RESTART: SETTING BY SCREEN ( FANUC) $0.00
1 COORDINATE SYSTEM ROTATION (G68,G69) ( FANUC) $0.00
1 TOOL LIFE MANAGEMENT ( FANUC) $0.00
1 TAPE MEMORY (5,120 MM / 2MB) ( FANUC) $0.00
MULTI SKIP FUNCTION ( FANUC) $0.00
1 COMMON VARIABLE EXPANSION 600 VARIABLES ( FANUC) $0.00
1 HELICAL INTERP. ( FANUC) $0.00
1 INSTALL LASER BROKEN TOOL DETECTION / TOOL MEASUREMENT $0.00
TOTAL $575,000.00
CUT HOURS 3301
Equipment, descriptions, and specifications are intended only as a guide.
Item(s) are Sold "As Is, Where Is" As inspected, unless otherwise stated and conveyed in writing.
Please feel free to contact us for any service requests and requirements as we have service techs available.
CUT HOURS 3301 - 2006 Matsuura H-Plus 630 PC2, horizontal machining center. X/Y/Z travel: 41.33"/36.2"/38.97", CAT 50 spindle, 12,000 RPM, 240-tool capacity, dual pallets, high-pressure coolant, chip conveyor, and FANUC controls.
Imperial
| X-Axis Travel | 41.33" |
| Y-Axis Travel | 36.2" |
| Z-Axis Travel | 38.97" |
| Spindle Taper | CAT 50 |
| Spindle Drive Motor | 40 hp |
| Spindle Speed | 12,000 RPM |
| Rapid Traverse | 2362 |
| Tool Capacity (ATC) | 240 |
| Number of Pallets | 2 |
| Pallet Size | 24.8" x 24.8" |
| Pallet Size (W) | 630 mm |
| Pallet Size (L) | 630 mm |
| Tool Probe / Auto Tool Length Measure | YES |
| Hi-Pressure Coolant System | 800 psi |
| Chip Conveyor | YES |
| Control | CNC (Matsuura G-Tech 30i) |
MATSUURA HORIZONTAL MACHINING CENTER $569,000.00
1 TURBO MICRO FINE CHIP CONVEYOR S/N 364390 $23,500.00
1 LASER BROKEN TOOL DETECTION / TOOL MEASUREMENT $11,570.00
1 DATA SERVER $5,100.00
1 MP700 RENISHAW IN PROCESS MEASUREMENT $13,050.00
1 CTS 800 PSI $8,900.00
1 MANUAL PULSE GENERATOR $1,500.00
1 CONTROL OPTIONS PACKAGE "D" ( FANUC) $8,800.00
1 DISCOUNT ($66,420.00)
1 PROBE SELECTION RELAY KIT $0.00
1 NO. OF REGISTERED PROGRAMS (1000 PCS) ( FANUC) $0.00
1 TOOL OFFSET NUMBER ADDITION (TOTAL 999) ( FANUC) $0.00
1 ADDITIVE WORK COORDINATE SYSTEM (300 SETS) ( FANUC) $0.00
1 9 PCS. OF OPTI BLOCK SKIP ADDIT'L WITHOUT HARD SWITCH ( FANUC) $0.00
1 PROGRAM RESTART: SETTING BY SCREEN ( FANUC) $0.00
1 COORDINATE SYSTEM ROTATION (G68,G69) ( FANUC) $0.00
1 TOOL LIFE MANAGEMENT ( FANUC) $0.00
1 TAPE MEMORY (5,120 MM / 2MB) ( FANUC) $0.00
MULTI SKIP FUNCTION ( FANUC) $0.00
1 COMMON VARIABLE EXPANSION 600 VARIABLES ( FANUC) $0.00
1 HELICAL INTERP. ( FANUC) $0.00
1 INSTALL LASER BROKEN TOOL DETECTION / TOOL MEASUREMENT $0.00
TOTAL $575,000.00
CUT HOURS 3301
Equipment, descriptions, and specifications are intended only as a guide.
Item(s) are Sold "As Is, Where Is" As inspected, unless otherwise stated and conveyed in writing.
Please feel free to contact us for any service requests and requirements as we have service techs available.
We use cookies to improve your experience. Privacy Policy.