DOOSAN PUMA 600LM CNC TURNING AND MILLING CENTER
CNC LATHES MULTI AXIS.jpg)
.JPG)
.JPG)
.JPG)
.JPG)
.JPG)
.JPG)
.JPG)
.jpg)
.JPG)
.JPG)
.JPG)
.JPG)
.jpg)
HERE'S A 2013 DOOSAN PUMA 600LM CNC TURNING AND MILLING CENTER WITH A FANUC 31iT CONTROL, STEADY REST, 21" CHUCK AND 5.98" BORE.
| Maximum Swing | 40.5" |
| Max Turning Diameter | 35.4" |
| Main Spindle Bore/Max Bar Capacity | 5.98/ 5.0 |
| Tail Stock/Sub Spindle | Tail Stock |
| Maximum Swing Over Cross Slide | 31.5" |
| Maximum Cutting Length | 125.9" |
| Distance Between Spindles | 125.9" |
| X-Axis Travel (X1, X2, X3) | 18.5" |
| Z-Axis Travel (Z1, Z2, Z3) | 127.36 |
| Main Spindle Chuck Size | 21" |
| Main Spindle Chuck Type | Hydraulic |
| Main Spindle Bore Diameter | 5.98" |
| Main Spindle Maximum Bar Work | 5.2" |
| Main Spindle Speed | 1,800 RPM |
| Main Spindle Horsepower (CONT. /30 MINS) | 60 |
| Turret Tool Positions 1, 2 | 12 |
| B Axis Rotary Tool Spindle Speed | 3000 rpm |
| B-Axis Rotary Tool Spindle Horsepower | 15 hp |
| Steady Rest | Yes |
| Chip Conveyor | Yes |
| (HQR) Standard Chuck Dia. Main Spindle (L) | 21" |
| Control | CNC (FANUC 31IT) |
| Weight | 48,000 LBS |
SPECIFICATIONS:
MAX. SWING 40.5"
MAX. TURNING DIA. (SHAFT WORK) 31.5"
MAX. TURNING DIA. (CHUCKING) 35.4"
DISTANCE BETWEEN CENTERS 125.9"
SPINDLE BORE DIA. 5.98"
X-AXIS TRAVEL 18.5"
Z-AXIS TRAVEL 127.36"
SPINDLE NOSE A2-15"
SPINDLE SPEEDS 1,800 RPM
GEAR RANGES 3
SPINDLE TORQUE 3,998 FT-LBS
TURRET CONFIGURATION 12
ROTARY TOOL HORSE POWER 15 HP
MAXIMUM TORQUE 103 FT/LBS.
MAXIMUM TOOL RPM 3,000 RPM
RAPID TRAVERSE 400/630 IPM
TAIL STOCK DIA. 6.3"
TAIL STOCK QUILL STROKE 5.9"
PROGRAMABLE T.S. BODY STANDARD
TAILSTOCK TRAVEL 101.98"
MAIN MOTOR 60 HP AC
MACHINE WEIGHT 48,000 LBS.
FANUC 31IT CNC CONTROL
21" 3-JAW HYDRAULIC CHUCK
(1) STEADY REST
(1) O.D ROTARY HOLDER
(1) I.D. ROTARY HOLDER
FULLY PROGRAMABLE BODY AND QUILL TAILSTOCK
CHIP CONVEYOR
ALL AVAILABLE MANUALS
ALL AVAILABLE TOOL HOLDERS
