DOOSAN PUMA 2600SYII LATHE WITH MILLING AND SUB-SPINDLE
CNC LATHES MULTI AXIS
THIS 2020 PUMA 2600SY IS EQUIPPED WITH A FANUC 0iT CONTROL, TURBO REAR DISCHARGE CHIP CONVEYOR, REAR COOLANT TANK, BARFEEDER, (3) ER32 X-AXIS STRAIGHT MILLING TOOLS AND (2) ER32 Z-AXIS (BOTH SIDES MILLING) TOOLS.
| Maximum Swing | 30.7" |
| Max Turning Diameter | 14.8" |
| Main Spindle Bore/Max Bar Capacity | 3.34"/ 3.0" |
| Tail Stock/Sub Spindle | Sub Spindle |
| Maximum Cutting Length | 29.9" |
| X-Axis Travel (X1, X2, X3) | 10.2 |
| Z-Axis Travel (Z1, Z2, Z3) | 32.7 |
| Y-Axis Travel (Y1, Y2, Y3) | +/-2.1" |
| Main Spindle Chuck Size | 10" |
| Main Spindle Chuck Type | Hydraulic |
| Main Spindle Bore Diameter | 3.34" |
| Main Spindle Maximum Bar Work | 3" |
| Main Spindle Speed | 4,000 RPM |
| Main Spindle Horsepower (CONT. /30 MINS) | 30 |
| Sub Spindle/2nd Spindle Chuck Size | 8 |
| Sub Spindle/2nd Spindle Bore Size | 2 |
| Sub Spindle/2nd Spindle Chuck Type | Hydraulic |
| Sub Spindle/2nd Spindle Speed | 6,000 RPM |
| Sub Spindle/2nd Spindle Horsepower (CONT. /30 MINS) | 20 |
| Turret Tool Positions 1, 2 | 24 |
| Turret Rotary Tool Spindle Speed 1, 2 | 5000 |
| Turret Rotary Tool Horse Power 1, 2 | 10 |
| B-Axis Travel | 32.7 |
| Bar Feed | Yes |
| Chip Conveyor | Yes |
| Chip Conveyor | Rear |
| Available Live Tool Holders | 5 |
| Rapid Traverse, X-Axis | 0 |
| Rapid Traverse, Y-Axis | 0 |
| Rapid Traverse, Z-Axis | 0 |
| Control | CNC (Fanuc OiT) |
| Dimensions | 142" X 75" X 75" |
| Weight | 14,400 LBS |
FANUC OIT CONTROL
TURBO REAR DISCHARGE CONVEYOR WITH REAR COOLANT TANK
EDGE REBEL 80 SLUG LOAD BAR FEED
(3) ER32 X-AXIS (STRAIGHT MILLING) TOOLS
(2) ER-32 Z-AXIS (BOTH SIDES MILLING) TOOLS \MANUALS
HAND WRENCH SET FOR ER22
BOX GUIDE WAYS
ACTIVE THERMAL COMPENSATION
